My training center is presently training the new BPI installer certification.Is anyone else training this course? What is your impression? Have you developed your own curriculum or are you using NYSERDA's curriculum? We are using BPI's props and we are having some issues. Are you having issues with the props too? Any feedback you may have on how the training is structured? Thanks...

Views: 395

Replies to This Discussion

Hey Matt-

We're offering this course monthly, using our own curriculum.  One thing I've done is limit the class size to 4 people.  I like to make sure they're comfortable both passing the exam and actually using these techniques in the field, and with a big class that's tough.  We can do it in 3 days, both airsealing and dense pack.

www.BuildingPerformanceWorkshop.com/training/installer

Thanks Corbett, We have our training setup for a class size of 6 and we use two proctors for the testing.NYSWDA's training center does not in most cases allow trainers to proctor those people that they just trained.  I train the class then two proctors test the class on the 5th day (3 trainees per proctor). We use NYSERDA's curriculm and it breaks down to this:

Monday- Building Science Module

Tuesday- WHALCI

Wednesday-WHALCI

Thursday- WHALCI

Friday- Testing 

So far so good but the props are taking a beating. Depending on the demand we may go to class size of 12 with 3 proctors on test day. I will also need an extra trainer on class days. How's the demand on your end? Is it a required certification in your state?

Corbrett, Are you using the BPI props?

 

Corbett, is the WHALCI mandatory in the new HPwES program there in Ill?

Matt,

We are offering WHALCI at our training facility and the one thing that I did to save the props was make the boxes and flat portions out of 3/4 melamine. The foam sticks very well to the surface. Once it's tested, the foam that is left on the reusable prop can easily be scraped off with a putty knife. I've been using the same props for over a year now and no problems.

Also, as far as I know, ILHPwES is not requiring the installers to be WHALCI certified. They are requiring the Analyst and Envelope Certs for the contractors.

Craig, Thanks. I'll keep your melamine tip in mind. Our props are beat to hell and I will have to replace them shortly.

Hey Matt and Corbett,

My name is Jason Scheurer, and I travel around the country teaching this curriculum for the past year or so and the props do take a beating. But we have noticed if you use the log sealer such as BPI recommends, the sealants come off easier. We  have gone to the Melamine way of things and it works even better. I am an Independent approved Super Proctor for BPI in BA, EP, RBE-WHALC, MF. I usually have up to (12) students in the class for (3) days of training, then another proctor comes in for (3) days and tests up to (4) students per day. We will switch off from training and proctoring since this is the new protocol for BPI. If any of you guys need help with training or proctoring, I am available.

Where did you find that information "log sealer, such as BPI recommends"?

Hi Debra,

NYSWDA tested a number of release agents about 3 years ago and pioneered the use of wax emulsion (log sealer) for their props. One brand is made by UC Coatings and is called Anchorseal which works well to allow foam to release from wood. If you have a lot of area to cover, you can use a garden sprayer to apply it, but a brush is better in most cases.

They also make Bates which works well to allow mastic to release from duct work. 

Thank you.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Rob Madden, Solar Home Broker posted a blog post

Phoenix 3rd Quarter Solar Resale Statistics Continue to Impress

Phoenix solar home sales were up during the third quarter of 2014, including the resale of homes…See More
5 hours ago
Everblue posted a status
"Green job alert! Energy Auditor in Baltimore, MD with Advanced Green Home Solutions. Check it out: http://bit.ly/1xhQuXO"
6 hours ago
Chris Clay replied to Isaiah Borel's discussion Blown Cellulose VS Blown Fiberglass in the Attic
"The Cold Climate Housing Research Center in Fairbanks, AK has alot of information about this…"
6 hours ago
Richard L. Sanderson replied to Bud Poll's discussion Inconsistant Local Authority
"Bud: I like the idea of a third party review board. My own experience in local government is that…"
14 hours ago
Matthew Lutz commented on Kaplan Clean Tech's blog post The Difference Between Home Inspection and Energy Auditing [Infographic]
"I would have to agree with Steve on this.  I am a Certified Energy Manager and have performed…"
19 hours ago
Matthew Lutz joined Diane Chojnowski's group
Thumbnail

Hall of Shame

In this group, members share an array of images from the field, showing the kinds of issues…See More
19 hours ago
Matthew Lutz replied to Kari Sauder's discussion Easy Water Heater Venting in the group Hall of Shame
"I have been in the HVAC trade since 1986. I have recently completed a Home or Real Estate…"
19 hours ago
Susan E. Buchan posted an event

EEBA Houses That Work at Hilton Asheville Biltmore Park

November 3, 2014 from 8am to 4:30pm
Registration: 8:00 amSession: 8:30 am to 4:30 pmWorkshop Covers:Introduction to EEBA and its…See More
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service