My training center is presently training the new BPI installer certification.Is anyone else training this course? What is your impression? Have you developed your own curriculum or are you using NYSERDA's curriculum? We are using BPI's props and we are having some issues. Are you having issues with the props too? Any feedback you may have on how the training is structured? Thanks...

Views: 426

Replies to This Discussion

Hey Matt-

We're offering this course monthly, using our own curriculum.  One thing I've done is limit the class size to 4 people.  I like to make sure they're comfortable both passing the exam and actually using these techniques in the field, and with a big class that's tough.  We can do it in 3 days, both airsealing and dense pack.

www.BuildingPerformanceWorkshop.com/training/installer

Thanks Corbett, We have our training setup for a class size of 6 and we use two proctors for the testing.NYSWDA's training center does not in most cases allow trainers to proctor those people that they just trained.  I train the class then two proctors test the class on the 5th day (3 trainees per proctor). We use NYSERDA's curriculm and it breaks down to this:

Monday- Building Science Module

Tuesday- WHALCI

Wednesday-WHALCI

Thursday- WHALCI

Friday- Testing 

So far so good but the props are taking a beating. Depending on the demand we may go to class size of 12 with 3 proctors on test day. I will also need an extra trainer on class days. How's the demand on your end? Is it a required certification in your state?

Corbrett, Are you using the BPI props?

 

Corbett, is the WHALCI mandatory in the new HPwES program there in Ill?

Matt,

We are offering WHALCI at our training facility and the one thing that I did to save the props was make the boxes and flat portions out of 3/4 melamine. The foam sticks very well to the surface. Once it's tested, the foam that is left on the reusable prop can easily be scraped off with a putty knife. I've been using the same props for over a year now and no problems.

Also, as far as I know, ILHPwES is not requiring the installers to be WHALCI certified. They are requiring the Analyst and Envelope Certs for the contractors.

Craig, Thanks. I'll keep your melamine tip in mind. Our props are beat to hell and I will have to replace them shortly.

Hey Matt and Corbett,

My name is Jason Scheurer, and I travel around the country teaching this curriculum for the past year or so and the props do take a beating. But we have noticed if you use the log sealer such as BPI recommends, the sealants come off easier. We  have gone to the Melamine way of things and it works even better. I am an Independent approved Super Proctor for BPI in BA, EP, RBE-WHALC, MF. I usually have up to (12) students in the class for (3) days of training, then another proctor comes in for (3) days and tests up to (4) students per day. We will switch off from training and proctoring since this is the new protocol for BPI. If any of you guys need help with training or proctoring, I am available.

Where did you find that information "log sealer, such as BPI recommends"?

Hi Debra,

NYSWDA tested a number of release agents about 3 years ago and pioneered the use of wax emulsion (log sealer) for their props. One brand is made by UC Coatings and is called Anchorseal which works well to allow foam to release from wood. If you have a lot of area to cover, you can use a garden sprayer to apply it, but a brush is better in most cases.

They also make Bates which works well to allow mastic to release from duct work. 

Thank you.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

John Nicholas commented on Jamie Press's blog post How to Choose the Right Solar Panels
"How much power do you need?  The looking up appliances and electronics usage, assigning time…"
7 hours ago
Rick Karg replied to Carly@AirCycler's discussion The (Small) Cost of Ventilation Without Recovery
"As a member of the ASHRAE 62.2 committee (and president of Residential Energy Dynamics, the author…"
Friday
Bradford E. White replied to Elizabeth Guinn's discussion ERV in need of backflow preventer.
"I would use an in-line backdraft damper such as Artis Industries or the ones made by Fantech and…"
Thursday
Kim Tanner posted a video

Wireless Air Leakage Testing

This webinar will discuss the use of WiFi technology to conduct and document blower door and duct leakage tests for compliance with local energy codes. The s...
Thursday
Profile IconPerry Grossman, Daniel Pate and Ottawa Furnace Filters joined Home Energy Pros
Thursday
Kirsten Richnavsky added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Breaking the link between unhealthy homes and unhealthy kids

Listen in on IAQ Radio to a discussion on reducing the household triggers that cause asthmaattacks…See More
Thursday
Kirsten Richnavsky posted a discussion

Breaking the link between unhealthy homes and unhealthy kids

Listen in on IAQ Radio to a discussion on reducing the household triggers that cause asthmaattacks…See More
Thursday
Kim Tanner posted events
Thursday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service