About a year ago John Tooley introduced me to Training Within Industry (TWI) and lean. 

http://twi-institute.com/

We've been using TWI Job Instruction (JI) for training our home counselors and technicians and have adopted those methods for our homeowner education.

Over 60% of our staff at CEE has gone thru JI training. Enterprise, Minnesota, our state Manufacturing Extension Partner (MEP), provided the training for us. Other states should have similar resources.


We have also gone thru lean training and have begun the process of applying lean approaches to our processes.

Anybody else have experience with this?

Views: 102

Replies to This Discussion

 

Hi Lester CHEN

 

Can you tell me more about learning about LEAN/TWI and WX

is there a ciriculum developed for installation part of WX?

What processes have you manged to make more LEAN.

What does CEE stand for ?

 

This sounds very exciting I hope folks will react to your post 

 

Greetings

Jan E. Gravemaker

Seattle WA

 

Hi, Jan,

 

I know that John Tooley is a strong adherent to TWI and that this surely was an influence in the development of the wx guidelines that DOE recently published. This would be manifested in the form of Job Breakdown Sheets for training.

 

In our residential program we've created Job Breakdown Sheets for training of our counselors and technicians who perform our home visits as well as for our administrative staff for our workshops and record keeping. All of our staff has had training in lean methods and we try to foster a culture of continuous improvement. We've done some value stream mapping and undertaken a few kaizen activities. It is still very much an ongoing process though since the program is new and we're learning as we implement. As a result, defining what we would call Standard Work can be a moving target as we learn from experience.

 

If you are interested in lean, I would suggest taking training in TWI Job Methods, Toyota problem solving method (A3 reports), value stream mapping and kaizen events. These are all very useful tools

 

btw CEE stands for Center for Energy and Environment. We're a not-for-profit in Minneapolis with over 30 years of experience in the field. http://www.mncee.org

 

Thanks for your reply and interest.

 

Lester S. Shen

Minneapolis, MN

Lester,

 

Thanks for your reply,

Yes a couple of years back John Tooley, made me aware how Energy Star NW was bringing

out these 8.5 X 11 visual go-no go (poke-yoke) sheets error proofing and how these tied in to

QA by the workers, while the job was done.

I had earlier experience in my college (MBA in sustainabilty) with the books on Toyota (LEAN)

production system by,  Jeffrey Liker CS and was really taken by the philosophy of a constantly

learning and improving organization, where management and line workers together figure out

what the best way is, to do the work.

Just came back from an exam in cold IOWA, for my LEAN bronze (lowest level) certification

as a LEAN professional.

Standard work is a real important starting point because it provides the stable basis to compare

the outcomes of KAIZEN improvements with, and establish through a PDCA cycle if an

"improvement" is really making things operate better, and than becomes the new standard,

or if the old standard is still the way to go.

Standard work is the basis fro training as well, so it is really a key stone  both in TWI and LEAN.

What has CEE put in place so far?

Have you worked on any office processes?

Audits or work orders for field work ? 

I really believe  this TWI?LEAN movement has the possibility in it, to lift this industry into

a much higher level of professionalism and maturity.

After all energy conservation/efficiency is the cheapest, least polluting form of energy production

available, and has a pretty high employment potential 

Thanks for sharing.

 

 

Kind Regards

Jan E Gravemaker

Seattle     

Jan,

 

I'd love to hear your suggestions and advice on how to implement lean. I wish that I could say that we had explicitly implemented lean process but it is more like an underlying influence. We have more explicitly adopted TWI tools for both our home visit and office procedures. What is driving our efforts at continuous improvement has been setting some clear, measurable goals. We've defined goals for cycle times (workshop length, home visit length, # of home visits per day per crew). We do job shadowing (gemba walk) on a regular basis. We have program goals for number of visits and upgrades and that has served as a strong motivator. We have our home visit down to an hour and a half. Our efforts with lean has helped us to get to that point. As we continue to adapt the program to get better results, we have to adapt and improve our audit procedures. So, I guess that I would say that standard work and measurable results are really important for the lean process. Our experience is that this has been lacking in the past.

 

Les

Lester, I have developed a curriculum for green building, weatherization, auditing and green jobs. A major component of the curriculum if OTJ training and hands on activities. You can check it out at www.organicthink.com.

 

Rob Moody

Organic Think Inc

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Profile IconEugene Swier, Richard Beyer and Diane Chojnowski joined Hal Skinner's group
Thumbnail

Radiant Control Coatings

A group where people who work with radiant barrier coatings can let others know all of their uses.See More
22 minutes ago
Hal Skinner added a discussion to the group Radiant Control Coatings
Thumbnail

Rooftop A/C units and exposed ductwork

Lets start a discussion about rooftop A/C units and exposed ductwork. The worst place to put a…See More
43 minutes ago
Richard Beyer posted discussions
1 hour ago
Brandon Walton replied to Brandon Walton's discussion EFAZ and APS Hosting Huge Welcome Party!!
1 hour ago
Brandon Walton shared their discussion on Facebook
1 hour ago
Brandon Walton posted a discussion

EFAZ and APS Hosting Huge Welcome Party!!

If your in Arizona on August 20th, stop on by and check it out!APS Home Performance Program Q&A…See More
1 hour ago
Brandon Walton posted an event

Efficiency First AZ is Hosting Huge Meeting August 20th! at Rennick's Restaurant in the Hilton Phoenix Airport Hotel

August 20, 2014 from 5:30pm to 7pm
APS Home Performance Program Q&A w/new leader Maggie Gibbs!Join Efficiency First Arizona (EFAZ)…See More
1 hour ago
Dennis Heidner replied to Jamie Kaye's discussion Flickering LED lights
""CFLs produce light by using electricity to instigate a chemical recation between mercury…"
2 hours ago
Richard Beyer joined Michael Stuart's group
Thumbnail

INFRARED THERMOGRAPHY USERS

This group is dedicated to knowledge sharing and discussion of infrared thermography for building…See More
2 hours ago
Profile IconTomás León, Tauran Ivall, Alex Burnham and 1 more joined Home Energy Pros
2 hours ago
Home Energy Magazine posted a discussion

Let's Talk Gender

It’s no secret that home performance is a male-dominated industry. Attend any industry conference…See More
5 hours ago
Mark Rogers added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Retrotec Blower Door Kit $1800

Retrotec Blower Door Kit complete with:DM2 Mark II digital manometer & automated fan…See More
6 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service