Information

Tools of the Trade

A hammer and a saw used to be the key tools for home contractors. Today, the best-in-breed also use high-tech equipment while performing a professional energy audit or verifying that construction has been done correctly.

Members: 94
Latest Activity: Jun 24

Add Tools to the Tools of the Trade Page

Add tools to the Tools of the Trade page by starting a new discussion. Click + Start Discussion in the Discussion Forum below to post.

Discussion Forum

Used Blower Doors? 3 Replies

Started by Isaac Savage. Last reply by Cameron Millard Jan 16.

Instant read thermometers 3 Replies

Started by Ryan Moore. Last reply by David Meiland Apr 29, 2013.

Good Place to Compare Appliances?

Started by Donna Sanders Jan 12, 2013.

Software should make it easier, not harder.

Started by Adin Maynard Nov 14, 2012.

Smoke puffers 8 Replies

Started by Paul Raymer. Last reply by Jim Gunshinan Mar 15, 2012.

CO Testing for BPI 6 Replies

Started by Paul Raymer. Last reply by Chris Stratton Mar 2, 2012.

Affordable Manometers? 2 Replies

Started by Isaac Savage. Last reply by Isaac Savage Feb 6, 2012.

Refrigerator and Freezer kWh/y Database 5 Replies

Started by Classic Residential, Inc.. Last reply by Paul Scheckel Oct 28, 2011.

i-Phone and i-Pad users 15 Replies

Started by Bret Monroe. Last reply by Bret Monroe Oct 28, 2011.

There's an app for that 1 Reply

Started by Lester Shen. Last reply by Classic Residential, Inc. Oct 27, 2011.

Comment Wall

Comment

You need to be a member of Tools of the Trade to add comments!

Comment by A. Tamasin Sterner on February 10, 2011 at 7:33pm
Ladies and Gentlemen, I have to tell ya, I'm a HUGE fan of flexible probes!  Love my flexible probe for my Testo 327 - NO more drilling!! and, the flexible, lighted probe on my video boroscope is awesome!  Today, I saw what was happening under a dryer - solved a combustion air issue by cleaning!
Comment by Graeme Nix on December 28, 2010 at 2:03pm

Ron, Paul,

First, the flow rings are always attached on the inlet side of the fan, regardless of whether you pressurizing or depressurizing. Admittedly, this does make it less convenient to change the rings if that becomes needed, since you'll have to remove the flex duct first.

The ability to test in either direction, however, is a key feature of the Retrotec DucTester. It is true, Ron, that if the grill mask holds tight, there should be very little difference in the results between depressurization and pressurization, however, the possibility does exist that if it's not properly secured, the grill mask can be pushed off a register, leading to faulty results, or a repeated test. Hence our recommendation. However, it must be clearly said that if there's a risk of polluted, dusty, or mouldy air being pulled into the house, the ducts do not need to be depressurized.

Comment by A. Tamasin Sterner on December 24, 2010 at 11:39am
We are using flexible probes for our combustion analyzers.  Great solution for checking undiluted flue gasses for CO content.  Instead of drilling holes in draft diverters in order to get the probe into the undiluted gasses, we use flexible probe.  Check out the photos I've uploaded.
Comment by Evan Mills on December 16, 2010 at 11:41pm

Some discussion over here on choosing IR cameras and blower doors.

Comment by Ron Jones on December 12, 2010 at 6:02pm

Thanks for that.  I've been curios since you raised the topic if there would be a difference.  I'll try it some time with my Energy Conservatory Duct Blaster and if I see anything funny I'll let you know.

Comment by Paul Raymer on December 11, 2010 at 8:05am

Ron -  As far as running the Retrotec duct tester either way, after your question, I was teaching a class yesterday, and we ran the duct tester both ways and got exactly the same result.  It was extremely handy to be able to leave the blower door installed to quickly do the Total Pressure and then the Pressure to outside.  (The ducts in the building I was testing were awful to say the least.  Even the theatrical smoke was diluted to the extent that it was hard to see.)

Comment by Paul Raymer on December 11, 2010 at 8:02am

Tamasin -

I have been using a Motion Computing J3500 for auditing.  It's built for field work with "Gorilla" glass and a solid state drive.  It is not cheap, but it's incredibly fast and extremely bright even in direct sunlight.  It takes a little getting used to - carrying this amazing machine in an attic or crawl space.  It takes pictures and even can serve as a telephone.

I have been playing with HomeGauge software.  It is designed primarily for Home Inspectors, but it does have an energy template.  I am working with them to refine the output, but it has a spreadsheet for BPI combustion safety testing, etc.  I like the idea that it is on my computer and I don't have to pay annual fees or individual use fees or any other fees.  I haven't done it yet, but they can take your data on-line so that your clients can download it.  It's really easy to add pictures and they have an enormous bucket full of pre-written comments like warnings about windows not being the first step in saving energy.  It does figure area weighted R values and the BAS as well.

The first report I did was about 35 pages long, which is very fancy, but too much information for the average homeowner.

Comment by A. Tamasin Sterner on December 10, 2010 at 5:28pm

Is anyone using Tablets for auditing? If so, what are you using and what software?  Do you like it?

Comment by Ron Jones on December 8, 2010 at 6:33pm
I don't think Retrotec's argument holds much water. Have they tested a hundred house systems both ways, pressurized and then depressurized, and measured the difference? I can't imagine it would be enough to impact my recommendations to a homeowner. I'm not giving you a hard time, it's just that this is the first time I've heard depressurizing ducts suggested, so the possibilities are intriguing. Have you done it?
Comment by Paul Raymer on December 8, 2010 at 6:53am
That certainly may happen. Retrotec advises depressurizing so that the duct masks are pulled more tightly against the grilles rather than being pushed off. Also, if a "Leakage to Outside" test is going to be done using the blower door, the blower door fan doesn't have to be turned around to blow air into the house. And if it is a cold winter day, blowing 25 Pa of outside air into the house may be more detrimental than some leakage from the crawl space.
 

Members (94)

 
 
 

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion Rooftop A/C units and exposed ductwork in the group Radiant Control Coatings
" "
1 hour ago
Hal Skinner replied to Hal Skinner's discussion Rooftop A/C units and exposed ductwork in the group Radiant Control Coatings
"I guess I got too mlong winded ther, it cut me off. 1.  Spray the coating on the ducts, plenum…"
1 hour ago
Kurt Shafer replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Jan, Here are some facts. the 30 inch fan from Home Depot (not one I would recommend) is rated at…"
2 hours ago
Hal Skinner replied to Hal Skinner's discussion Rooftop A/C units and exposed ductwork in the group Radiant Control Coatings
"Hi Tom. It looks like I will have to start off most of my answers to questions with this…"
2 hours ago
Everblue posted a video

Retrofitting Your Home for Energy Efficiency

Building Science: What is an Energy Audit? Using a Blower Door Test. Retrofitting Your Home for Energy Efficiency
3 hours ago
Profile IconTimothy Blair and Tomás León joined Home Energy Pros
3 hours ago
Home Energy Magazine's discussion was featured

Let's Talk Gender

It’s no secret that home performance is a male-dominated industry. Attend any industry conference…See More
3 hours ago
Diane Chojnowski replied to Home Energy Magazine's discussion Let's Talk Gender
"ACI has a webpage for their Women in Home Performance initiative:…"
3 hours ago
Hal Skinner commented on Hal Skinner's group Radiant Control Coatings
"Hi Ryan and welcome aboard. No doubt we can learn from each other for sure, I am the proverbial…"
3 hours ago

Kenneth Brooks just added their location.
(via Member Map)

4 hours ago
Tom Mallard replied to Hal Skinner's discussion Rooftop A/C units and exposed ductwork in the group Radiant Control Coatings
"I'm interested in these coatings, have seen something in trade mags and know it's $$$ off…"
6 hours ago
Jan E. Graveamker replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Hi, I have seen these fans in mounted in hall way ceilings, I have a couple of issues with…"
6 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service