Visualizing air currents is a critical part of building analysis.  If you can see the airflows, you can often determine what's working and what isn't.  You can use a mirror for combustion analysis, but seeing a trail of smoke sucked in under the draft diverter is a clear indication that there is no spillage.  You can use a manometer to set up the doors for worst case, watching a trail of smoke is quicker.

The Retrotec AC107 smoke stick has been the tool of choice, but shipping regulations has made them difficult to get.  I am curious to know what other air current indicators people are using for testing and diagnostics.

Tags: air, current, puffers, smoke, testers

Views: 4658

Replies to This Discussion

Hi Paul,

I've used the "Wizard Stick" from time to time.  It's a fog generator that is essentially a kids toy, so non-toxic and is easy to use.  Not sure how rugged it is, but might be worth checking out and trying:

http://www.amazon.com/American-Science-Surplus-Wizard-Stick/dp/B000...

Matt Schwoegler

The Snell Group

Paul,

We carry a variety of smoke puffers but I know the Retrotec puffer was the most popular.  We still have some left but due to the new Hazmat regulations we most likely won't be able to carry them much longer. The Wizard Stick that Matt mentioned below and the Bottle Puffer made by The Energy Conservatory other 2 comparable puffers, one downfall is the mixing of chemicals.  We also have smoke machines (Rosco 900) for bigger jobs.  Let us know if you hear of anything else comparable, we'll be happy to hunt it down for you!

Thanks,

Tracy & Matt

ConservationStrategies.com

800-989-6686

I find the Wizard Stick easier to use than the Puffer. It puts out a lot more "smoke".   Both have problems: constant lancing of the Puffer outlet and if you are not carefull about draining the Wizard Stick, the toy train smoke fluid used gets on everything in your bag.  A good source for the Wizard Stick is Pow Science on the web.

Has anyone had experience with the Dragon Puffer?  It's more professional looking version of the Wizard Stick and also comes in a kit...

Dragon-Puffer-Kit details 

Paul ... the Wizard Stick is produced by folks that seem really concerned about the performance of their products ... I have been in touch with them a few times ... but I'll be damned if I can get that thing to work ... I have a couple & they always seem to fail as I'm walking the client through ...

I use a smoke pen. It is great for draft, duct leakage, and general air leakage ID. The one drawback is that it smells like somthing is burning becasue it uses a a wick that is buring while giving off a steady stream of non-toxic smoke. I personally like it and get great photo documentation specifically of return duct leaks. This can be purchased from Grainger Regin Hvac S220 Smoke Pen with 6 Wicks 3 Hours

Attachments:

Hi Paul,

Thanks for writing all of the tools-of-the-trade articles.  A big help for many folks.

I just switched from the Wizard Stick to the Dragon Puffer.  Both use food-safe theatrical fog fluid and were invented by Joel and Alan Aronie of Zero Toys in Concord, MA. I believe the Smoke Pencil is a rebranded Dragon Puffer.  As others have said, be sure to keep the unit upright, and don't over-pump the fluid.

I have used the Retrotec product, but didn't like getting even an occasional inadvertent whiff.  The MSDS info convinced me to switch. I do like that it can have any orientation and it was easy to regulate the amount of smoke generated.

To me, the talcum powder type puffer was an unimpressive performer for light air movement. And it can't be used while pointing down.

The Björnax Smoke Pen imported from Sweden by Regin works well despite being a heat-buoyant smoke, but it is difficult to regulate the amount of smoke generated.  It also creates ionized particles from burning a stearic acid impregnated cotton wick which can more easily trigger smoke alarms than the foggers. 

The foggers are non-ionizing and are less likely to set off smoke detectors unless they are the more expensive optical sensing smoke detectors. 

One of the best working battery-driven theatrical fog generators is the Tiny Compact Fogger C07 by Look Solutions. Works well if a lot of fog is needed for just a 1 second or more burst of fog, but a bit much for checking combustion appliance draft.  And at $1850, it is not cheap. It's cousin, the F07, is perfect for remote triggering in ductwork.

Dale

Paul reviewed some of the most common smoke puffers in an article that will be published in the May/June 2012 Home Energy Magazine. Check it out, as well as Paul's other articles in the Home Energy "Tools of the Trade" column series. Great series IMHO.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Kevin Jordan posted a photo
30 minutes ago
Mike Burton joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
2 hours ago
Hal Skinner replied to Trip Smith's discussion Starting a Home Weatherization Business. Considering it...
"Hi Tri,p Your 'Yard sign' comment caught my eye.  I work with a Radiant Barrier…"
2 hours ago
Profile IconEric Kjelshus and Trip Smith joined James Sayers's group
Thumbnail

Marketing Energy Efficiency

Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
5 hours ago
Bob Blanchette replied to Christopher Talarico's discussion Heating with Tankless Water Heater & Hydronic Air Handler vs. Gas Furnace
"When it costs the same price as 2 separate systems there is no juice regardless of how hard you…"
6 hours ago
j. west shared Christopher Morin's blog post on Facebook
11 hours ago
j. west commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"You're right Christopher- the trick to saving the profit margin is being in several places at…"
11 hours ago
tedkidd replied to Christopher Talarico's discussion Heating with Tankless Water Heater & Hydronic Air Handler vs. Gas Furnace
"Nice posts Steven and Eric.   Scale on my combi is a recurring problem.  Attaching…"
12 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service