I've been trying to find an affordable (<$150) 2-port manometer that measures pascals, down to the tenth of a pascal. Is seems that there are a lot of units that can measure in IWC at low levels, but not in pascals.
I don't need one that does anything fancy. I just want to see pressure. Has anyone had any luck finding such a unit? If so, please let me know!
Isaac Savage
Home Energy Partners
828-350-1155
Tags:
Permalink Reply by Isaac Savage on February 6, 2012 at 6:01pm I found one (after lots of searching)! It appears to cost around $350.
Dwyer makes one that measures kPa to .0001 resolution. If you don't mind moving the decimal over in your head, it's an easy way to save about $450/manometer.
The model # is: Dwyer 477-000-FM
Permalink Reply by Isaac Savage on February 6, 2012 at 6:17pm Actually, you don't even have to move decimals in your head. It also reads in pascals to 0.1 resolution.
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Meagan Foster posted events
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event
Meagan Foster updated an event
Anna Svensson posted a discussion
Bryce Cramer joined Leslie McDowell, BPI's group
Bryce Cramer replied to Mike Kandel's discussion June's Stump the Chump: What's Wrong with this Picture? in the group Building Performance Institute (BPI)
James Hatheway added a discussion to the group Job Board© 2013 Created by Lawrence Berkeley National Laboratory.