Hello,

Long time veggie burner and biodiesel brewer.

My house has a gas combi boiler, I want to also run a separate boiler system. This will circulate hot water from the garage to the house.I checked the clean energy video to get some idea about this,but couldn't.

I want to use this heat in the existing house heating system (and later, DHW). But I don't want to remove or interfere with the existing gas combi setup.


I'm hoping that if I put a heat exchanger on the return side of the current heating loop, I could simply use the existing boilers (room stat) heat demand control to switch the combi's pump on and off. When the boiler sees it is getting hot water back up it's return it will hopefully keep the pump running but not burn any gas.


Does this seem likely? Or is it too easy and I will need to fit an extra pump in the house heating circuit.

Any help will be appreciated.

thank you.

Views: 44

Replies to This Discussion

http://www.hotwater.com/lit/wiring/e1100.pdf

same pump is needed Just to easy!

RSS

Discussion Forum

Latest Activity

Profile Iconasine and seymour schreiber joined Home Energy Pros
20 hours ago
Rodney Bailey added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Energy audit equipment for sale.

We have a package of energy audit equipment that some one can use to open his or her energy…See More
yesterday
Rodney Bailey joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
yesterday
Don Hynek replied to Brandon Walton's discussion When is it too windy to use blower door?
"You did a pretty good job -- there are a few tricks of the trade that might have improved precision…"
yesterday

Photos

Loading…
  • Add Photos
  • View All

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service