Isaac_mineral_capsheet%5B1%5D.pdf

Rolled roofing is simply composition shingles just like used on homes, except they are 4 feet wide and various lengths.

Here is the process used when applying our RCC to mineral capsheet roofing.  This is a patio deck cover in Sacramento.  It was owned by Mr. Elmer Isaac.  He was a retired electrical engineering contractor.  He was 93 when we did this in 2003..

Thios was a rolledroofing (Mineral capsheet) roof.  We did this as a 1-ply roofing system using stitchbond polyester roofing cloth.  It was a fairly cool day which allowed us enough time to 'Fly in' the cloth.

The single ply system was not necessary on thius roof but the owner wanted it done like that. 

What does this do for a roof as far as energy savings goes?  No matter what time of day, the coated roof will be within 3 to 5 degrees of whatever the ambient air temperature is at that moment.

Other benefits with this roof coated;

1.  NO FURTHER DECOMPOSITION of the roof from the suns rays.  The coating penetrates into the shingles past the granules and into the first layer of felt.  The granules are encapsulated.

2.  The coating locks down the shingles and they turn into one single ceramic tile.  No more shingles blowing up and off the roof anymore in high winds.

How strong is the bond?

Views: 28

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Profile IconAlfonso Scott, Susan Benford, HomeWiz and 2 more joined Home Energy Pros
1 hour ago
Hannah Wood added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Healthy Home Evaluator (HHE) certification + recorded webinar

Thanks to those of you who joined BPI's webinar on the Healthy Home Evaluator certification…See More
1 hour ago
Michelle Usher posted a blog post

Addison Homes Wins Pinnacle Award for Best Achievement in Energy Efficiency

Addison Homes was amongst the home building industry’s best and brightest honored with a 2016…See More
1 hour ago
Eric Kjelshus replied to Beverly Lerch's discussion Fireplace drafts
"A brick chimney will take some 70,000 BTU's to heat up to draft on a fireplace.   A…"
13 hours ago
Ed Voytovich replied to Beverly Lerch's discussion Fireplace drafts
"Our solution was to install a Lopi Answer wood burning insert that vents directly through a metal…"
21 hours ago
Jim Gunshinan's blog post was featured

A Healthy Home and a Healthy Bottom Line

There has been a lot of interest of late in the weatherization and broader home performance…See More
yesterday
Jonathan Beers commented on Home Energy Magazine's blog post Natural Gas is Becoming Less Attractive
"The carbon intensity of electricity use (lbs. of CO2/MWh) varies a lot from region to region. For…"
yesterday
Diane Chojnowski posted events
yesterday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service