The RCC Classroom (Radiant Control Coatings)

Information

The RCC Classroom (Radiant Control Coatings)

A group where energy professionals can learn about all the different energy saving aspects of RCCs.  I have worked with one particular RCC for 30 years.  I have amassed alot of information I can share.  Everyone knows, accepts and understands how RCCs work as a 'Cool Roof' coating.  However, that seems to be where the knowledge on these products different energy saving applications abruptly stops.  I hope to change that with this group. 

There are over 300 protective coatings out there and they all say they save energy. Out of nearly 4,000 members of this forum, only one has stepped up and said he works with an RCC as well.  I hope others will add their experiences with these coatings as well.

Please understand that I do not place myself above or think I am smarter than ANYONE with what I know.  I am an authority on the coating I have worked with and I am willing to share that experience. 

How this coating performs, my website and archive

 

Members: 16
Latest Activity: Nov 28

 

 

Discussion Forum

Rooftop A/C units and exposed ductwork 12 Replies

Started by Hal Skinner. Last reply by Hal Skinner Sep 22.

What this RCC will do on an exterior wall compared to standard paint. 11 Replies

Started by Hal Skinner. Last reply by Hal Skinner Oct 16.

The 'Touchy - Feely' sales pitch. 4 Replies

Started by Hal Skinner. Last reply by Hal Skinner Aug 25.

How our ceramic based RCC works 3 Replies

Started by Hal Skinner. Last reply by Hal Skinner Oct 9.

Combining energy efficiency with fire safety 2 Replies

Started by Hal Skinner. Last reply by Hal Skinner Aug 12.

ENERGY SAVING USES OF RCC'S IN / ON /UNDER and near MOBILE HOMES 2 Replies

Started by Hal Skinner. Last reply by Hal Skinner Nov 19.

Perm rating

Started by Hal Skinner Nov 21.

Our RCC and retaining heat

Started by Hal Skinner Nov 11.

Florida Solar Energy Center certification.

Started by Hal Skinner Nov 1.

Our RCC's performance in Yuma, AZ

Started by Hal Skinner Oct 25.

Improved acoustics

Started by Hal Skinner Sep 21.

Walmart goes green in Texas

Started by Hal Skinner Sep 17.

The ice cream freezer and Grandma's house

Started by Hal Skinner Sep 10.

RCC, videos , tests and resulting ENERGY CALCS

Started by Hal Skinner Aug 10.

Our RCC to different types of roofs

Started by Hal Skinner Aug 9.

A little clarification

Started by Hal Skinner Aug 8.

Using an RCC to stop interior mold.

Started by Hal Skinner Aug 4.

Comment Wall

Comment

You need to be a member of The RCC Classroom (Radiant Control Coatings) to add comments!

Comment by Kurt Shafer on September 2, 2014 at 4:30pm

Wow, I am very sad to hear about your eyes. 

Would have been super to do that comparison.

Good luck. 

Perhaps I should do this experiment...What RCC do your recommend and can I apply it?

Comment by Hal Skinner on September 2, 2014 at 4:14pm

My dads house has an attached garage.  It was converted to living space around 20 years ago.  The interior walls and ceiling are coated with our RCC.  It is by far the coolest room in the house.  HE has even commented on how much cooler it is than the rest of the house.

I have asked him many times if I could do the same in the rest of the house.  He just cannot understand how it could work on the inside of a building.  He has coated the AC unit and ducts at his church, dropped the air temp coming ion by 12 degrees.  He coated a friends large well water tank.  HE KNOWS IT WORKS ON THE OUTSIDE. 

No room in his attic left to go in and spray.

 

Due to diabetes hurting my vision and two lousy optathamologists missing with their lasers and making me legally blind, I am out pf the active role with this coating.  Cant climb a ladder or walk on a roof anymore, I'll fall off.

Thats why I have the time to be on here.

Hafta pass on that bet, sorry. 

 

Comment by Kurt Shafer on September 2, 2014 at 3:34pm

Hal, do I see a terrific chance for you to show us all the power of your RCC?

Your father's home can be your demonstration platform just as my home is being set up as a demo for radiant foil. 

I propose a wager. You put in your RCC and see what a difference it makes next time it is 98 out. Then put in foil and see what happens. 

I will wager $100 that atticfoil.com foil beats your RCC.

Kurt

Comment by Hal Skinner on September 2, 2014 at 3:08pm

That same RCC, used as paint on the ceiling of living space, will do the same as if it was applied to the roof or the underside of the roof decking.  It will not let that heat energy radiate down into the living space.  THAT is how a Radiant Control Coating is SUPPOSED to work.

Comment by Craig Bird on September 2, 2014 at 2:23pm

Correct, that is exactly what I said

Comment by Hal Skinner on September 2, 2014 at 1:54pm

At 1.7% enterng the structure, that Radiant barrier is now going to allow the R-rated insulation/s to perform their function on a greatly reduced temperature scale.

It was 98 degrees here yesterday.  I went to my 80 year old fathers and watched the Giants game.  About the 4th inning, around 4 pm, it was awful in that old house.  We sweated. 

He has blown in insulation in the attic with 2-levels of what I believe he said was R-30 on top of that.  But the house gets God awful hot and nobody wants to come over because of it.

IOh well.  He's 80 and used to it I guess.

Comment by Craig Bird on September 2, 2014 at 1:35pm

And how much of that 1.7% of the suns energy that got through the RB or RCC gets into the house, will depend on the R-value of the insulation in the ceiling.

Comment by Hal Skinner on September 2, 2014 at 1:14pm

OK.  This might be rudamentary here.  I want to make sure everyone understands how SOLAR REFLECTIVITY (se) and  THERMAL EMISSIVITY (TE) work and why understanding both is so important.

I will explain it as it was explained to me many years ago by an energy lab scientist;

Every material known to man has it's own measurable levels of SOLAR REFLECTIVITY and  THERMAL EMITTANCE. 

A percentage of the heat energy from the sun (the solar load)  is reflected away from the materials surface back into the atmosphere.  The remainder of that heat energy enters the material.  The material then emits a percentage of that energy back in the direction it came from.  If you know the reflectivity and emissivity of the material, its simple math to determine what percentage of the solar load actually enters the structure.

Example;  Reflectivity - 0.83 - (83%) 17% enters the material.

                 Emissivity - 0.90  (90%)  90% of that 17% is emitted back out.

That leaves 1.7% of the sun's heat energy that gets past the material and enters the structure.

Some RCCs carry those nymbers.  Thats why they are so effective.

Some of them are just as effective when used on the interior of buildings vs conductive and radiant heat energy.

 

The RCC classroom

 

 

 

Comment by Craig Bird on September 2, 2014 at 1:04pm

Hal - I would disagree that radiant heat "goes through" fibrous insulation. Radiant heat transfers only through air. When it hits a solid, it is either absorbed or reflected. Since fibrous insulation does not have a very high reflectivity, most of it gets absorbed. At that point, you are battling convection/conduction. This is the reason that radiant barrier savings go down significantly when attics have a high amount of insulation at the attic floor. Research shows that the highest savings from radiant barriers occur when low levels of insulation are present in the attic and lowest savings when high levels of insulation are on the attic floor. The radiant barrier is always going to help but the amount of help depends on how fast that converted radiant heat goes through the given depth of insulation.

Comment by Hal Skinner on September 2, 2014 at 12:43pm

Hi KLurt.

I would isagree with the comment that the attic floor is heated by the convection. 

The R-rated insulation works against conductive and convective heat.  It does little to nothing vs radiant heat and that is what goes through the R-rated insulation and heats the ceiling / attic floor.

 

Members (16)

 
 
 

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Sean Lintow Sr replied to Bud Poll's discussion Basing air exchange on house volume??
"Sorry Bud but I think you need to clarify your issues with using volumes to calculate ACH As for…"
9 hours ago
Profile IconWes Anderson, Jean-Paul and Bryan joined Home Energy Pros
Friday
Dennis Heidner commented on Dale Stephens's blog post LED Lighting 24-month update 18,240 hours & counting
"Dale, good write up. For the landscaping bulbs,  if they had been T3 12V wedge bulbs,  I…"
Friday
Brett Little commented on Tom White's video
Thumbnail

The Future of Housing - And How Airtightness Can Help

"It's very true! So many people and contractors have tons of insulated attics but no air seal…"
Thursday
Chris Leach replied to Richard Beyer's discussion "The Dangers of Using Spray Foam Insulation"
"The problems will surface soon enough . Why don't we take a second look at this over rated…"
Thursday
Don Fitchett commented on Tom White's video
Thursday
tedkidd replied to Bob Blanchette's discussion How does Cycles Per Hour affect real world AFUE?
"Want to spot a simpleton? It's a guy who thinks EE and comfort are disconnected.  Want…"
Thursday
tedkidd commented on Tom White's blog post Clean Energy Works Oregon: Total Home Performance
"Nice post Tom! I really like how he puts that. Leveraging interests so they can optimize…"
Thursday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service