Stay Cool With Easy To Install Ductless AC System!

 

 

 Save $300.00 Off A New AC System For A Limited Time Only!

 

 

 

A ductless mini-split air conditioner is one solution to cooling part of a house.

 

WHAT DOES THIS MEAN FOR ME?

  • A ductless mini-split air conditioner is easier to install than a central air conditioning system.
  • A ductless mini-split air conditioner provides zoned air conditioning without ducting.
  • A ductless mini-split air conditioner is relatively easy to install and does not provide an entry point for intruders as some room air conditioners do.

Ductless, mini split-system air-conditioners (mini splits) have numerous potential applications in residential, commercial, and institutional buildings. The most common applications are in multifamily housing or as retrofit add-ons to houses with "non-ducted" heating systems, such as hydronic (hot water heat), radiant panels, and space heaters (wood, kerosene, propane). They can also be a good choice for room additions and small apartments, where extending or installing distribution ductwork (for a central air-conditioner or heating systems) is not feasible.

Like central systems, mini splits have two main components: an outdoor compressor/condenser, and an indoor air-handling unit. A conduit, which houses the power cable, refrigerant tubing, suction tubing, and a condensate drain, links the outdoor and indoor units.  

 

ADVANTAGES

The main advantages of mini splits are their small size and flexibility for zoning or heating and cooling individual rooms. Many models can have as many as four indoor air handling units (for four zones or rooms) connected to one outdoor unit. The number depends on how much heating or cooling is required for the building or each zone (which in turn is affected by how well the building is insulated). Each of the zones will have its own thermostat, so you only need to condition that space when it is occupied, saving energy and money.

Ductless mini split systems are also often easier to install than other types of space conditioning systems. For example, the hook-up between the outdoor and indoor units generally requires only a three-inch (~8 centimeter [cm]) hole through a wall for the conduit. Also, most manufacturers of this type of system can provide a variety of lengths of connecting conduits. So, if necessary, you can locate the outdoor unit as far away as 50 feet (~15 meters [m]) from the indoor evaporator. This makes it possible to cool rooms on the front side of a building house with the compressor in a more advantageous or inconspicuous place on the outside of the building.

Since mini splits have no ducts, they avoid the energy losses associated with ductwork of central forced air systems. Duct losses can account for more than 30% of energy consumption for space conditioning, especially if the ducts are in an unconditioned space such as an attic.

Compared with other add-on systems, mini splits offer more flexibility in interior design options. The indoor air handlers can be suspended from a ceiling, mounted flush into a drop ceiling, or hung on a wall. Floor-standing models are also available. Most indoor units have profiles of about seven inches (~18 cm) deep and usually come with sleek, high-tech-looking jackets. Many also offer a remote control to make it easier to turn the system on and off when it's positioned high on a wall or suspended from a ceiling. Split-systems can also help to keep your home safer, because there is only a small hole in the wall. Through-the-wall and window mounted room air-conditioners can provide an easy entrance for intruders.H.O. Services

 

DISADVANTAGES

The primary disadvantage of mini splits is their cost. Such systems cost about $1,500 to $2,000 per ton (12,000 Btu per hour) of cooling capacity. This is about 30% more than central systems (not including ductwork) and may cost twice as much as window units of similar capacity.

The installer must also correctly size each indoor unit and judge the best location for its installation. Oversized or incorrectly located air-handlers often result in short-cycling, which wastes energy and does not provide proper temperature or humidity control. Too large a system is also more expensive to buy and operate.

Some people may not like the appearance of the indoor part of the system. While less obtrusive than a window room air conditioner, they seldom have the built-in look of a central system. There must also be a place to drain condensate water near the outdoor unit.

Qualified installers and service people for mini splits may not be easy to find. In addition, most conventional heating and cooling contractors have large investments in tools and training for sheet metal duct systems. They need to use (and charge for) these to earn a return on their investment, so they may not recommend ductless systems except where a ducted system would be difficult for them to install.

Tags: Electricians, HVAC, Plumbers

Views: 156

Attachments:

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Brian Clavette added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

FLIR i-7 thermal imaging camera

Hi,I have a very lightly used FLIR 1-7 for sale.   i-7, serial # 60101-4267.  Full hard case and…See More
5 hours ago
Don Fitchett commented on Home Energy Magazine's blog post At Home with the Internet of Annoying Things
"True, for the smart consumer, the power savings should offset the additional power usage. For the…"
7 hours ago
Michael Dunseith posted an event

BPI Exams - All at Green Jobs Training Center

March 2, 2015 at 10am to March 31, 2015 at 2pm
Green Jobs Training Center is currently providing written and field exams for all of BPI…See More
8 hours ago
Michael Dunseith posted photos
8 hours ago
Dennis Heidner commented on Home Energy Magazine's blog post At Home with the Internet of Annoying Things
"Nice article. I am an electrical engineer, creating sensors for data collection and "possibly…"
9 hours ago
Chris Hunt commented on Home Energy Magazine's blog post At Home with the Internet of Annoying Things
"Hi Alan, You correctly identified a lot of the potential issues coming with the IOT or the…"
9 hours ago
Nicole Miller joined James Sayers's group
Thumbnail

Marketing Energy Efficiency

Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
11 hours ago
Avi Yashchin posted a video

CleanEdison: BPI Training

Avi Yashchin's former company, CleanEdison, provided education and training for those seeking clean jobs, These services included Exam Prep for Leadership in...
11 hours ago

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service