Multifamily Buildings Members (131)

← Back to Multifamily Buildings
Kim Tanner

Minneapolis, MN, United States

Donna Sanders

Kansas City, MO, United States

Bruce Helft

Dobbins, CA, United States

Steve Lommele

Golden, CO, United States

Tom Conlon

Sonoma CA, United States

Linda Wigington

Waynesburg, PA, United States

Susan Dee

Clarksville, NY, United States

Joe Stephenson

Apex, NC, United States

Brad Cook

Warren, VT, United States

Robert Logston

Baltimore, MD, United States

John C. Carlson

Diamond Bar, CA, United States

Craig McManus

Dothan, AL, United States

Jeff Mounts

Portland, OR, United States

Michael Salmon

Gloucester, MA, United States

Andrew McDowell

Downingtown, PA, United States

Paul Morin

Minneapolis, MN, United States

Jonathan Beers

Madison, WI, United States

Barry NewDelman

Portland, OR, United States

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
1 hour ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
2 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
3 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
4 hours ago
Lars olsen posted a blog post
12 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
23 hours ago
Hans Joachim Preiss replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Good discussion. I came across this comprehensive presentation by Gas Consultants on the effects at…"
yesterday
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Excellent reply Hans. I think that there isnt' a good general answer to this question but that…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service