INFRARED THERMOGRAPHY USERS

Information

INFRARED THERMOGRAPHY USERS

This group is dedicated to knowledge sharing and discussion of infrared thermography for building sciences and energy applications.

Members: 164
Latest Activity: on Monday

Discussion Forum

Google Thermal View? 4 Replies

As most of you know, there is more to an energy audit or energy rating (such as a HERS rating) than just the thermal imaging - but this start up company is using it to get a nationwide database going.........Here's a link to the article on…Continue

Tags: Audit, business, Energy, Google, imaging

Started by Joshua Knittel. Last reply by tedkidd May 31, 2013.

Infrared Image - What is it? 6 Replies

We thought it'd be fit to share this infrared image we received from group member, CK Ang, in New Zealand. Just wanted to spark some discussion here on what you guys think this image is of, and what the problem could be. A little background on the…Continue

Tags: Fluke, Ti55FT, telephoto, lens, Ang

Started by Fluke Thermal Imaging. Last reply by Dale Sherman Apr 26, 2012.

Timber Home with no effective air barrier 1 Reply

Hi folks,just another image of a brand new timber home without an effective air barrier, and without sealing tapes.…Continue

Started by Davide Lanzoni. Last reply by Sean Lintow Sr Apr 11, 2012.

New article on infrared thermography 1 Reply

The Journal of Light Construction has long been respected as a place where builders can educate themselves and share information. I was recently asked to write an article introducing their readers to thermography and how it can be used in the…Continue

Started by John Snell. Last reply by Jim Klebes Nov 17, 2011.

Moisture detection, a fascinating thermal signature

I don't mean to derail folks from this website to ours (I often send folks here too!) but that is exactly what I'm going to do because www.IRTalk.com has a fascinating discussion about thermal signatures of…Continue

Started by John Snell Sep 9, 2011.

New York first passivhaus ... 4 Replies

... with windows with a better R-value than walls ?…Continue

Started by Davide Lanzoni. Last reply by John Snell Aug 25, 2011.

Using thermal imagers in the summer 5 Replies

Too many thermographers leave their imagers in the case during the summer. This comes, in part, from the way we used to work when imagers were not nearly as sensitive and our understanding of how to use them was limited to winter work.Get the darned…Continue

Started by John Snell. Last reply by Tyson Pischel Jul 7, 2011.

Expert Eye Needed 15 Replies

Hi AllWanted to get the opinion of an expert.Attached is a photo of a customer's window.... as you can see there is a large cold spot above the window... Here's my opinion..am I right?The large horizontal cold spot is thermal bridging from the…Continue

Tags: windows, ir

Started by Matthew P. Last reply by Ed Minch Jun 30, 2011.

IR and Moisture Meters 12 Replies

As many of you know the new RESNET Guidelines are being worked on and I am advocating for the use of Moisture Meters to ensure potential serious moisture problems in sidewalls and building substrate material is not being overlooked when identified…Continue

Started by Bret Monroe. Last reply by allen p tanner Jun 23, 2011.

Certification for RESNET Thermographers 12 Replies

I’m just back from the RESNET national conference in Orlando and I am very excited to report that RESNET certification is now available! What’s needed?• You must be a RESNET Building Performance Auditor or a Rater• You must have 3 months experience…Continue

Started by John Snell. Last reply by Mark Cleminson Mar 22, 2011.

Comment Wall

Comment

You need to be a member of INFRARED THERMOGRAPHY USERS to add comments!

Comment by Jeremy Begley on February 9, 2014 at 1:25pm

What does anyone think about these? Do know anything about the specs? 

IPhone/Android Thermal Imager

Comment by Bruce A. Bailey on August 29, 2013 at 10:07am

Does anyone have a recommendation for best level 1 IR training in the Southeast US with emphasis on energy auditing and Energy rating? Thanks

Comment by John Wes on July 8, 2013 at 3:39pm

Looking to buy a thermal imaging camera soon. Want to know what is the best one out there for the features and price?

 

Thanks

J.W.

Comment by Judi Lyall on May 30, 2013 at 4:20pm

Hello Folks,

     I have decided to retire and would like to sell my equipment. I have a rarely used 2 year old FLUKE TiR. I used it for checking insulation and building science stuff. Asking 3490.00, my number is 818.625.0987 Here is the details: FLUKE%20001.JPG

INCLUDED:
INSTRUCTIONS IN ENGLISH AND SPANISH
2 VIDEOS
USB READER
SHOULDER STRAP
HARD AND SOFT CASE
WALL CHARGER
EXTRAS INCLUDED: CAR CHARGER AND SUN SHEILD
Includes IR-Fusion® Technology both in camera and software (combines visible image with IR image in full screen or picture-in-picture views) for easy identification and reporting of problems
Rugged and reliable: Engineered to withstand a 2 m (6.5 ft) drop
9.1 cm (3.6 in) diagonal landscape color VGA (640 x 480) LCD
Temperature range and thermal sensitivity optimized for building diagnostics applications
Perfect for any application and budget
Excellent thermal sensitivity for seeing even small temperature differences (which could indicate problems)
Adjustable hand strap for left- or right-handed users
Everything needed to get started is included.
Training DVD is now included free. See how easy it is to set up your thermal imager, create professional reports with SmartView software and learn thermography theory with step-by-step video instructions.
Manufactured in the U.S.A.

ONLY 3490.00                       CALL ME 818.625.0987

Thanks Judi Lyall 

Comment by Joshua Knittel on May 21, 2012 at 4:46am

As most of you know, there is more to an energy audit or energy rating (such as a HERS rating) than just the thermal imaging - but this start up company has a good idea on how to get a nationwide database going.....

Here's a link to the Treehugger article:

http://www.treehugger.com/clean-technology/startup-takes-google-str...

Comment by John Snell on May 26, 2011 at 5:09pm
No, despite what some suggest, it is not a simple process to determine R-value or otherwise quantify heat transfer based on a single thermal image. Still, images can be very compelling and other tests can fill in the numbers.
Comment by Hal Skinner on May 26, 2011 at 5:02pm

That was what I had somewhat envisioned for that test.

 

One room in a home.  Half the wall painted with the coating and half with regular paint and thermal picture from the outside to show the heat energy reduction.

 

The 2nd test would be painting the coating on a section of a wall and regular paint on the EXTERIOR wall, again both on the same wall of a room - half and half, to show the reduction.

 

What I am most curious to see is if what it shows on the thermal picture can be measured in some form.  Or, is that going to require other measuring equipment to determine exactly what % of reduction we are looking at in the thermal picture.

 

What radiation / heat energy they see on one half vs what they see on the other.  Can a thermal inage akone determine that?

Comment by John Snell on May 26, 2011 at 4:50pm

Hal, One of the issues you run right into using thermography to show the impact of insulating coatings is that the imagers SEE radiation. Thus if the coating reflects radiation in the wavelengths detected by the imager, you'll see that but that doesn't necessarily show how effective the coating is. Better to paint some of the interior wall surfaces and leave others unpainted and then look at the wall from the exterior; of course this assumes all walls are same construction (except the coating) and that all thermal influences on both sides of the wall are similar. 

I know some folks have tried this sort of test but I'm not convinced they "dotted all their i's and crossed all their t's" if you know what I mean.

It might be more effective to design a demonstration on a smaller scale, say a couple of cardboard boxes with the same internal heat source. If the coating actually reduced heat transfer, it would show up on the exterior side. John N. is correct, however, in that most people would not accept a couple of cardboard boxes as good science!

Comment by John Nicholas on May 26, 2011 at 9:04am

Hal,

 

If you set it up so you could follow a standardized testing protocol, such as RESNET, ANSI, or ASTM perhaps you could make a claim.  Would your claim be accepted by the building performance industry?  Some would, some wouldn't.

 

Your best bet to establish a insulative value for any product claiming to retard heat transfer is to pay an independent lab to do a guarded hot box test on it.  That will actually measure the heat loss per sf in each sample.  The test is repeatable, and is not subject to interpretation.  With this independent test, you can get DOE, RESNET, BPI and other entities that are recognized within the industry to use the information.

Comment by Hal Skinner on May 26, 2011 at 7:57am

Hi Michael.

 

I have a question;  How exact a science is thermal imaging?  I have many years working with an insulating coating but ZERO experiences with thermal imaging.

 

Hypothetical situation;  If we painted an insulating coating on the interior sheetrock of a home, say we painted half a wall, I would expect a themal image showing a reduction in the loss of heat through that wall to the outside colder air.

 

Is thermal imaging an exact enough science so that those images can be analyzed to determine the exact amount of heat loss reduced and thereby calculate it's equivolent R-rating? 

 

Thanks and my apologies if this sounds like a dumb question.

 

Members (164)

 
 
 

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Profile IconRamon Aguirre, John Kane, Bobby Hight and 3 more joined Home Energy Pros
46 minutes ago
Jim Gunshinan commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Thanks Nate for more good stuff to chew on—and nutritional! We may be running out to Home…"
10 hours ago
Tom Conlon commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Jim,I just got around to re-reading your four-part series and I think this is a really interesting…"
10 hours ago
Nate Adams commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"$50 in health ain't much... not with my crappy high deductible plan. It buys half of a cold…"
10 hours ago
tedkidd commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Yep, this thread has some good discussion. Back to dehumidification.  This may be…"
14 hours ago
Jim Gunshinan commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Thanks for the clarification Nate. If I had the ability to precisely measure what $50 of health…"
15 hours ago
Nate Adams commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Jim, Just a clarification, it's not DEhumidification I'm worried about in your climate,…"
16 hours ago
Chris McTaggart posted events
16 hours ago
Jim Gunshinan commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Hi Nate, I'm glad this post has generated so much good discussion, since that is its main…"
16 hours ago
Diane Chojnowski's group was featured
Thumbnail

Facebook Pages

Does your company or organization have a Facebook Page?This group is for pros who have facebook…See More
16 hours ago
Tom White joined Diane Chojnowski's group
Thumbnail

Facebook Pages

Does your company or organization have a Facebook Page?This group is for pros who have facebook…See More
16 hours ago
David Valley's photo was featured

ceiling_infrared

Cold air infiltrating the lower right portion of this wall and ceiling.
16 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service