INFRARED THERMOGRAPHY USERS Discussions (19)

← Back to INFRARED THERMOGRAPHY USERS
Discussions Replies Latest Activity

IR Workshop in the works - we need a utility case study on IR energy audits

I'm working on an IR workshop that will be held at U North Dakota, Grand Forks in mid April. Cosponsors including UND, WAPA, and my organiz…

Started by Jill Cliburn

12 Mar 22, 2011
Reply by Mark Cleminson

Hypalon Roof Inspection

Has anyone had any issues inspecting a Hypalon roof? I went to the Dupont website and found they no longer manufacture the product. The roo…

Started by John Wagner

0 Feb 28, 2011

Does there need to be a large temp difference to see if walls have insulation

Hi everyone,    I am new at understanding how to read an infrared camera. I want to see what a wall looks like with or without insulation.…

Started by Judi Lyall

15 Feb 21, 2011
Reply by Ron MacGregor

Flat Roof Inspection Question

Has anyone out there done any flat roof inspections where the decking is 2.5" Gypsum board with a BUR covering (the gypsum is the decking).…

Started by Jamie Kaye

0 Feb 3, 2011

Suggestions Welcomed

Suggestions and Ideas for written retrofit specifications wanted.  New siding and windows on this 1975 era house.  West wall.  Ambient bet…

Started by John Nicholas

0 Feb 3, 2011

Thermal imaging while foam is being installed...possible?

I am going to be working on a super quick build coming up in 2 weeks. The house will be built in 106 hours from start to move in - Extreme…

Started by Jamie Kaye

5 Jan 3, 2011
Reply by George W. Reynolds

Cleaning the IR Lens

Is there any instructions out there for cleaning the camera lens? At my level one class, I was told how to do it and what to use (Kim Wipes…

Started by Jamie Kaye

3 Dec 16, 2010
Reply by Jamie Kaye

Cleaning the IR Lens

Are there any instructions out there for cleaning the IR camera lens? At my level one class, I was told how to do it and what to use (Kim W…

Started by Jamie Kaye

0 Dec 15, 2010

Checking the full range

I thought the images(s) below might be of interest to the group. The situation: an early morning gathering of external images at a building…

Started by Bill Smith

12 Dec 7, 2010
Reply by Michael Stuart

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Steve Waclo joined Allison A. Bailes III's group
Thumbnail

HVAC

HVAC design, Manuals J, S, T, & D, Duct leakage, Air flow, ENERGY STAR new home requirements,…See More
6 minutes ago
Bob Blanchette posted a discussion

Dual Fuel Systems, at what point do they make sense?

Heat Pump with furnace backup. These make no sense in our area with local NG rates, but they do…See More
13 hours ago
Bob Blanchette joined Hal Skinner's group
Thumbnail

The RCC Classroom (Radiant Control Coatings)

A group where energy professionals can learn about all the different energy saving aspects of…See More
13 hours ago
Shashank Kirloskar posted a blog post

Important Facts about Solar Energy

“I’d put my money on the sun and solar energy. What a source of power! I hope we don’t have to wait…See More
yesterday
reflintorm replied to Dennis McCarthy's discussion Solid state lighting - saves lives- and it improves life .
"In my observation, In most of the lightning appliances led bulbs are used because of their…"
Thursday
Chad Mcaulife posted photos
Wednesday
Bob Blanchette commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Calculation
"Infiltration makes a HUGE difference. Look at the heat loads on a windy day vs. a calm one. On a…"
Wednesday
Bob Blanchette commented on Everblue's blog post Poor HVAC Installation Leads to Increased Energy Use
"That explains a LOT of why HVAC system continue to be sized by the same "rule of thumb"…"
Wednesday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service