Are you looking at scanning power lines for 'phantom' loads, ''Hot' lines, over heated lines or is this for home energy auditing?
Utility energy auditing for commercial use utilizes power consumption. Is this what you are looking for as IR is not part of that scenario. Meter draw and equipment draw are usually monitored. We do utilizde IR for overloaded motors and some heat ed lines and breakers.
Check my site www.nyinfraredscan.com and see if this is what you are looking for.
We do IR in conjunction with a blower door to discover energy leaks, missing insulation, phantom loads on meter boxes, and moisture problems.
Level III ASNT
Thanks-- I will check this out. We've dealt with a wide range of needs. WAPA has an equipment loan program and has supported basic training for both utility distribution system applications and basic energy auditing. Amazing what those cameras can do! My guess is that we will be sticking closer to our region for support, but I am welcoming folks from our Clean Energy network to join this IR group.
I am an Infrared trainer with Infraspection Institute and on the IR training committee at RESNET being sponsored at Disney Hilton Feb 27 this week. If you have need of an IR trainer for your business or have further questions; contact me please.
I wanted to see if you had interest with the support of The Snell Group. We have worked together with WAPA to provide weatherization infrared training in the past along with training the WAPA transmission group. Please let me know how we might assist with your workshop or other opportunities going forward...
Best Regards. ~Mark
I have tried to register through your CleanEnergyAmbassadors.ning.com and when I reply to the email I get an error message. Can you please email directly at firstname.lastname@example.org, so we can connect and I can get you some materials for the workshop...