Is there any instructions out there for cleaning the camera lens? At my level one class, I was told how to do it and what to use (Kim Wipes I think) and also use some cleaner? It went so quick and I don't have any notes or "how to's".

I have a FLUKE Ti32. I have been doing inspections in attics with fiberglass and have some dust on the lens, or so it looks (could be microfibers of glass dust). Is there any advice or picture led instructions out there for this? I remember Greg saying something like a 100 wipes of the lens, or something before it is compromised?!. Big investment, so I am scared to touch it!

How many of you out there use a plastic bag around your camera? Any brand of plastic bag or wrap that works best?

 

Thanks.

Tags: IR, IR lens, cleaning, imager, thermal

Views: 186

Replies to This Discussion

Jamie,

 

Good question!   

 

Most of the time, there is very little need to actually actively "clean" the lenses of your infrared imager.

However, in the event lens cleaning is required, here is what I recommend for Fluke Thermal Imagers:

 

1)       Use a photography air bulb to gently blow debris or dust from the lens area.  (DO NOT USE compressed air, nitrogen, or carbon dioxide which may cause a temperature drop and "thermally shock" the lens.)

2)       If you do not have a photography air bulb, you can also use a photography lens brush or small artist's paintbrush to gently brush off the surface of the lens.

3)       If the lens is still not cleaned sufficiently, or there are fingerprints or residue present, you can clean the lens with the following procedure:

a.       Create a light soap solution with a few drops of a mild liquid soap (like dish soap) in a small container of warm water.

b.       Dampen a clean micro-fiber cloth in the solution.

c.       Gently wipe the surface of the lens with this cloth, but do not apply significant pressure.

d.       Allow to air dry or gently pat the surface of the lens with another, clean, but dry micro-fiber cloth

 

Keep in mind that you should very rarely need to clean lenses if the cameras are taken care of, and stored properly.   Dust particles will usually not cause any deterioration of image quality or performance.  Fingerprints also do not cause major issues because they are not in the focal plane of the target objects.  However, fingerprints contain oils, which if left on the surface of the lens, can cause the special coatings to deteriorate.   If the coating deteriorates or is significantly scratched, there will eventually be deterioration in performance.

 

DO NOT use any kind of solvents or commercial cleaners to clean your lenses, (No acetone, alcohol, ammonia, benzene, etc.) as these could damage both the coating and the sealants in the lens assembly.  

 

DO NOT immerse the camera or lenses in any liquids, as they are not waterproof, only moisture resistant per the IP54 testing standards.

 

DO NOT use dirty or heavy rags to clean the lenses, as these can result in scratching.

 

The cases and holsters can be carefully cleaned with light soapy solution and a standard, damp cleaning cloth of some type.... Just like Fluke's other meters.

 

I hope that this helps!

 

Regards,

 

Michael

 

Michael D. Stuart
Sr. Product Marketing Manager
Thermal Imaging Products
Fluke Corporation
 
Thermal / Infrared Thermography, Level III
Certified in compliance with ASNT Standards 
 

It is, as you suggest, simpler to keep the lens clean in the first place. Any thin-film bag that is highly transparent to infrared radiation works well. If it is also visually transparent, like a dry cleaner bag, then you can wrap your whole  imager and still see the view screen. Test for transparency by looking at something like a wall with and without the bag—go for a bag with the least change in image or temperature involved.
Thermally yours,

John Snell

The Snell Group

www.thesnellgroup.com

www.IRTalk.com

Thanks for the great responses.

 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

eric anderson replied to Kaushal Bharath Raju's discussion Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.
"This is my no calculations half assed energy based  renovation suggestions- First off,…"
6 minutes ago
Ed Minch commented on Jim Gunshinan's blog post Energy Out West 2014
"We have been in the instrumented energy auditing and retrofitting business since 1981 and we have…"
41 minutes ago
Allison A. Bailes III commented on Jim Gunshinan's blog post Energy Out West 2014
"Great article, Jim. I run into cynics, too, and not only are they unrealistic, but they're…"
42 minutes ago
Everblue posted events
55 minutes ago
Stephanie@SaveOnEnergy posted a video

Powered by SaveOnEnergy.com

Ask Kim - How to Read Your Meter

In this episode, Kim explains how to read your electricity meter either to monitor your own consumption or to double check your bill.
1 hour ago
Tom Mallard replied to Kaushal Bharath Raju's discussion Affordability & Deep Energy Upgrade/Passive House Retrofit in Berkeley, California.
"I've been working on simple thermal upgrades and for collecting heat the roof is a best place…"
1 hour ago
Chris Dorsi posted an event
Thumbnail

2014 Habitat X Summer National Conference at Chico Hot Springs

August 25, 2014 to August 28, 2014
The 2014 Habitat X Summer National Conference will take place at Chico Hot Springs, just down the…See More
2 hours ago
Mst. Fatema Aktar is now a member of Home Energy Pros
12 hours ago
Robert Leone added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Blower Door Package for Sale

Hi,I am selling my blower door with extras as a package or individually. These items are used but…See More
18 hours ago
Profile IconRobert Leone and Richard Vito joined allen p tanner's group
Thumbnail

Energy Auditing Equipment for Sale, Trade or to Purchase

Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
18 hours ago
Richard Vito joined Sean Lintow Sr's group
Thumbnail

Best Practices (Residential)

Best Building, Retrofitting, or even Auditing Practices - what are they, what should change, what…See More
yesterday
Richard Vito joined James Sayers's group
Thumbnail

Marketing Energy Efficiency

Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service