Are there any instructions out there for cleaning the IR camera lens? At my level one class, I was told how to do it and what to use (Kim Wipes I think) and also use some cleaner? It went so quick and I don't have any notes or "how to's".

I now have a FLUKE Ti32. I have been doing inspections in attics with fiberglass and have some dust on the lens, or so it looks (could be microfibers of glass dust). Is there any advice or picture led instructions out there for this? I remember Greg saying something like a 100 wipes of the lens, or something before it is compromised?!. Big investment, so I am scared to touch it!

How many of you out there use a plastic bag around your camera? Any brand of plastic bag or wrap that works best?

 

Thanks.

Tags: IR, IR lens, cleaning, imager, thermal

Views: 9

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Bob Blanchette posted a discussion

Dual Fuel Systems, at what point do they make sense?

Heat Pump with furnace backup. These make no sense in our area with local NG rates, but they do…See More
26 minutes ago
Bob Blanchette joined Hal Skinner's group
Thumbnail

The RCC Classroom (Radiant Control Coatings)

A group where energy professionals can learn about all the different energy saving aspects of…See More
27 minutes ago
Shashank Kirloskar posted a blog post

Important Facts about Solar Energy

“I’d put my money on the sun and solar energy. What a source of power! I hope we don’t have to wait…See More
yesterday
reflintorm replied to Dennis McCarthy's discussion Solid state lighting - saves lives- and it improves life .
"In my observation, In most of the lightning appliances led bulbs are used because of their…"
yesterday
Chad Mcaulife posted photos
yesterday
Bob Blanchette commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Calculation
"Infiltration makes a HUGE difference. Look at the heat loads on a windy day vs. a calm one. On a…"
yesterday
Bob Blanchette commented on Everblue's blog post Poor HVAC Installation Leads to Increased Energy Use
"That explains a LOT of why HVAC system continue to be sized by the same "rule of thumb"…"
yesterday
Profile IconChristian Asdal and Shashank Kirloskar joined Home Energy Pros
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service