I'm looking for good reference data for modeling HVAC equipment using make and model number.  Preston's doesn't work so well, few Mfr. sites work well.  What do you use?

Views: 23

Replies to This Discussion

When you say you want data for modeling the equipment, what exactly do you mean, Stan? Are you talking about modeling it in REM/Rate or REM/Design? Using Manual J/S/T/D? Something else?

We use ahridirectory.org for new systems and Preston's Guide for older systems when putting the efficiency and capacity into REM/Rate. If neither of those works, we resort to the age-based defaults from the HERS Standards (pp. 3-34 & 3-35).

For HVAC design work, you have to get the mfr's performance data because you need fan curves and more.

I neglected to say that I need the data for modeling in REM, TREAT and a couple other rater/auditor tools.  Thanks for the information Allison.  I don't have good success with the AHRI site either though.

No one that I know has good success with AHRI! It only works for systems currently in production and then not always. If you know the system is new enough and the coils are matched in the AC/heat pump, you can always call them up and get them to help you with it if it's really critical. Sometimes it's in their system, and that's the only way to get it out. You also need to have other methods, like the ones I mentioned above.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

William H Nickerson commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"Tom , Once again you missed the bigger story As a rater who cant sell Energy star because most…"
4 minutes ago
Diane Chojnowski commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"Thanks so much for your blog Jim!"
5 minutes ago
bart laemmel commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"I do have to say I found no connection between the title, the body and the conclusion.…"
5 minutes ago
Richard Scott Mills commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"Well said Jim, It was helpful and appropriate. Until we find the connections to each…"
6 minutes ago
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"Plop me smack dab in the middle of this one. Cut the baby in half. Stories DO connect us because we…"
6 minutes ago
Trish Holder commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"I enjoyed this very Jim. And I agree -- it is STORIES that influence people the most. It is stories…"
7 minutes ago
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"And who was the poet declaring the undeniable truth - that to the guy with only a hammer, the…"
7 minutes ago
Ron Jones commented on Jim Gunshinan's blog post The Universe Is Made of Stories
"I thought I'd read a story. Instead I got a sermon."
8 minutes ago
Tom Delconte replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"MyFoxPhilly says they're up: simple weatherizing . Maybe it's regional!"
16 minutes ago
Pat Dundon replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"I agree with a lot of what is written here, but I think too much of the time HP Pro's get so…"
22 minutes ago
Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"  I think that this study  may be more to the point on problems in "selling…"
2 hours ago
Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"I think that most homeowners lack proper education on the proper way to achieve significant…"
2 hours ago

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service