Allison A. Bailes III's Discussions

Discussions Replied To (9)	Replies	Latest Activity
"Bob, that's a great question, but I think it'd be better to post it in the main foru…" Allison A. Bailes III replied Jan 8, 2011 to BPI vs HERS	1	Jan 8, 2011 Reply by Allison A. Bailes III
"No one that I know has good success with AHRI! It only works for systems currently i…" Allison A. Bailes III replied Dec 20, 2010 to Looking For Good HVAC Data	3	Dec 20, 2010 Reply by Allison A. Bailes III
"When you say you want data for modeling the equipment, what exactly do you mean, Sta…" Allison A. Bailes III replied Dec 20, 2010 to Looking For Good HVAC Data	3	Dec 20, 2010 Reply by Allison A. Bailes III
"Bruce, When you reply, please put your comments somewhere other than inside the quo…" Allison A. Bailes III replied Dec 9, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?	71	Dec 23, 2012 Reply by dale conner
"David, you can check your gas consumption at the meter. If you had measured that for…" Allison A. Bailes III replied Dec 9, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?	71	Dec 23, 2012 Reply by dale conner
"Great topic for discussion here, TJ. The answer is that you should NOT leave the fan…" Allison A. Bailes III replied Nov 29, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?	71	Dec 23, 2012 Reply by dale conner
"John, who sized the system at 52.2 kBtuh, and how did they come up with that number?…" Allison A. Bailes III replied Nov 16, 2010 to Multiple HVAC Systems in one Home	5	Nov 16, 2010 Reply by Allison A. Bailes III
"Yes, I think you could split it up into three different files, John, but I don't tru…" Allison A. Bailes III replied Nov 7, 2010 to Multiple HVAC Systems in one Home	5	Nov 16, 2010 Reply by Allison A. Bailes III
"You can't do that with REM, John. You'd have to enter everything at least on a zone…" Allison A. Bailes III replied Nov 6, 2010 to Multiple HVAC Systems in one Home	5	Nov 16, 2010 Reply by Allison A. Bailes III

Discussions Replied To (9)

Replies

Latest Activity

"Bob, that's a great question, but I think it'd be better to post it in the main foru…"

Allison A. Bailes III replied Jan 8, 2011 to BPI vs HERS

Jan 8, 2011
Reply by Allison A. Bailes III

"No one that I know has good success with AHRI! It only works for systems currently i…"

Allison A. Bailes III replied Dec 20, 2010 to Looking For Good HVAC Data

Dec 20, 2010
Reply by Allison A. Bailes III

"When you say you want data for modeling the equipment, what exactly do you mean, Sta…"

Allison A. Bailes III replied Dec 20, 2010 to Looking For Good HVAC Data

Dec 20, 2010
Reply by Allison A. Bailes III

"Bruce, When you reply, please put your comments somewhere other than inside the quo…"

Allison A. Bailes III replied Dec 9, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

Dec 23, 2012
Reply by dale conner

"David, you can check your gas consumption at the meter. If you had measured that for…"

Allison A. Bailes III replied Dec 9, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

Dec 23, 2012
Reply by dale conner

"Great topic for discussion here, TJ. The answer is that you should NOT leave the fan…"

Allison A. Bailes III replied Nov 29, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

Dec 23, 2012
Reply by dale conner

"John, who sized the system at 52.2 kBtuh, and how did they come up with that number?…"

Allison A. Bailes III replied Nov 16, 2010 to Multiple HVAC Systems in one Home

Nov 16, 2010
Reply by Allison A. Bailes III

"Yes, I think you could split it up into three different files, John, but I don't tru…"

Allison A. Bailes III replied Nov 7, 2010 to Multiple HVAC Systems in one Home

Nov 16, 2010
Reply by Allison A. Bailes III

"You can't do that with REM, John. You'd have to enter everything at least on a zone…"

Allison A. Bailes III replied Nov 6, 2010 to Multiple HVAC Systems in one Home

Nov 16, 2010
Reply by Allison A. Bailes III

Eric Kjelshus replied to Patrick Michaelyan's discussion Hot Upper Stories

"When I am asked to fix this home. I start with a Heat Loss and gain, blower door IR sq…"

1 hour ago

Edward Foskey just added their location.
(via Member Map)

6 hours ago

Martin Easley and Richard Vito joined Home Energy Pros

10 hours ago

Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans

"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"

14 hours ago

Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans

"If you can't talk them into replacing with IC rated... Look into Tenmat - those are designed…"

14 hours ago

Bachi Brunato posted a discussion

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More

20 hours ago

2 Comments

Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories

"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"

yesterday

Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??

"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"

yesterday

Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??

"Amen, make energy show it's true cost instead of subsidizing it. We have some of the lowest…"

yesterday

Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??

"The press report really doesn't give enough information to clearly answer why they are…"

yesterday

Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump

"Gustavo, Thanks for the input. I agree with you in that I will be waiting till my system's…"

yesterday

Gustavo Melo commented on Edward Foskey's blog post Preparing to Update the Heat Pump

"Any system that is out of warranty is really a coin toss as to whether it is financially better to…"

yesterday

Allison A. Bailes III's Discussions (27)

"Bob, that's a great question, but I think it'd be better to post it in the main foru…"

"No one that I know has good success with AHRI! It only works for systems currently i…"

"When you say you want data for modeling the equipment, what exactly do you mean, Sta…"

"Bruce, When you reply, please put your comments somewhere other than inside the quo…"

"David, you can check your gas consumption at the meter. If you had measured that for…"

"Great topic for discussion here, TJ. The answer is that you should NOT leave the fan…"

"John, who sized the system at 52.2 kBtuh, and how did they come up with that number?…"

"Yes, I think you could split it up into three different files, John, but I don't tru…"

"You can't do that with REM, John. You'd have to enter everything at least on a zone…"

Home Energy Pros

Latest Activity

Edward Foskey just added their location.(via Member Map)

Boxing and Insulating Around Non-ICAT Cans

Edward Foskey just added their location.
(via Member Map)