Steven Lewis's Discussions (39)

Discussions Replied To (22) Replies Latest Activity

"The drain handles the condenstae water from the A/C evap coil. It will have crud in…"

Steven Lewis replied Dec 6, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"You might want to call TRAne, I havent heard from my service tech yet. He is probabl…"

Steven Lewis replied Dec 6, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"Yes i got the pictures. The model & serial #'3 will be on a tag behind the botto…"

Steven Lewis replied Dec 6, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"The manual you have is about all that is available. I will talk to our service tech…"

Steven Lewis replied Dec 6, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"When you are writing a responce. there is a camera symbal at the top of the reply bo…"

Steven Lewis replied Dec 6, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"Have you taken the front doors off the furnace or are you looking down through or ar…"

Steven Lewis replied Dec 5, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"That is usually something a knowledgable service tech will do. It is involved for a…"

Steven Lewis replied Dec 5, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"Your furnace had a variable speed (DC) motor on the inducer assembly as well as the…"

Steven Lewis replied Dec 5, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"The higher the MERV # the more restrictive the filter is to airflow. You need to bal…"

Steven Lewis replied Dec 4, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

"Since your furnace is a down or counterflow, you should be able to remove the filter…"

Steven Lewis replied Dec 4, 2010 to Furnace Blower Fan on 100% of the time - Good or Bad or it depends?

71 Dec 23, 2012
Reply by dale conner

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
7 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
7 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
10 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
11 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
12 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
13 hours ago
Lars olsen posted a blog post
21 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service