Information

Facebook Pages

Does your company or organization have a Facebook Page?

This group is for pros who have facebook pages. Post the link to your facebook page in the comments so that folks can like you on facebook.

Members: 121
Latest Activity: Apr 7

Comment Wall

Comment

You need to be a member of Facebook Pages to add comments!

Comment by Robert R Gilbert on March 5, 2012 at 6:59am
Comment by Guido Schuler on March 5, 2012 at 6:41am
Comment by Jordan Bateman on March 4, 2012 at 7:27pm

http://www.facebook.com/capstonehomesllc

Focusing on EE upgrades when remodeling homes in the Houston area

Comment by John Pitek on January 19, 2012 at 1:45pm
Comment by Paul D McGovern on January 19, 2012 at 11:26am
Comment by Diane Chojnowski on January 19, 2012 at 5:43am

Hi Randy, The idea is to connect on Facebook and share our posts so that the EE messages get spread to our networks and friends. Ideas are powerful. It only takes a few minutes to go down this list and "like" the facebook pages of the other members and start spreading the news.

Comment by randy tolowski on January 15, 2012 at 11:49am

Being somewhat Facebook illiterate how does this work? will it improve knowledge of EE? Can we share information? Can we set up a clearinghouse of knowledge that doesn't cost money for every tidbit of information? I feel the Energy Efficiency market is geared more towards selling the BA or contractor classes than actually creating a demand for our product : IE saving money and using our finite fossil resources in a better way, with comfort being the end result. We will not move forward if there is always a $$$ on knowledge. Only when you know what to do will you do what you know.

Comment by Gerald Deredita on January 5, 2012 at 12:10pm

Please note updated Facebook address for Amedank. Thanks, Jerry https://www.facebook.com/pages/Amedank/141232599324977

Comment by Carol A. Markell on January 5, 2012 at 6:59am

Tom White, Home Energy's publisher, toured the 9th ward in New Orleans in December. The pictures of some of the rebuilding efforts are now on our Facebook page. If you are interested, take the short tour:

http://on.fb.me/yi6Lly

Comment by Randy Wilkerson on January 1, 2012 at 6:46pm

Hi Diane, thanks for the welcome back in Aug, I have been a bit busy this year and I have not had too much time to get to involved on the site. I hope to change that this year.  

Thanks!

Randy

 

Members (121)

 
 
 

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
1 hour ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
1 hour ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
3 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
4 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
5 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
6 hours ago
Lars olsen posted a blog post
14 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service