Historic windows present challenges when it comes to mitigating the effects of UV and thermal transfer. Providing both UV and thermal barriers for historic windows is often accomplished via some ancillary attachment. Here are a few examples, with associated pros and cons:

 

Insulated roller shades
- Can protect against UV while still allowing natural ventilation

- Can sometimes be concealed when not drawn (doesn't always interfere with historic import)
- Not the best possbile air or thermal barrier - e.g., in winter, can still allow for condensation to form on glass

 

Sealed quilt or roman shade

- This refers to a heavier, well insulated interior shade mounted on tracks that forms a reasonably good air seal around the window
- A well known brand is  Window Quilt (claimed R value from 4.6 to 7.1)

- Bulky, and may not appeal to some; may detract from historic import
- Better air/termal barrier than a roller shad, but might be less than adequate if both UV protection and natural ventilation are desired in summer

 

Exterior storm window
- Might help to further mitigate any air/moisture infiltration issues
- Newer ones are designed to be nearly invisible - don't detract from historic import
- Can be onerous to remove every spring and replace every fall

 

Use of exterior awnings, overhangs, or plantings (transpiration, shade)
- Natural, passive
- Can help extend the effects of existing heating/cooling mechanisms

 

In general, what approaches have any of you attempted, and what sort of results have you achieved? What seems to be a preferred strategy (or combination of strategies), or potential best practice solution to this problem?

Tags: Barrier, Preservation, Thermal, Transfer, UV, Windows

Views: 1563

Replies to This Discussion

I did an audit recently for a lady that does custom window treatments.  Curtains, blinds, drapes.  She discussed the Hunter Douglas line of blinds that she handles.  Interesting stuff.  Some have an Energy Star Label, and make claims of an R-Value.

My personal preference is for Solar control outside the envelope.  My professional guidance is that people have to do something and an effective interior solar control they will have installed and use is better than an approach that is not used or even installed.

Thanks very much Bill, for describing your exterior storm solution (sorry I'd neglected to reply when you first posted this a year ago). Question I have is: Do you drill weep holes in the bottom furring strip supporting the exterior storm? And if so, do you just leave them open or install small plugs and open or close when necessary? Thanks Bill!

Hi John,

I don't internet much either.

I install the bottom furring strip in pieces and usually have enough left over from the other 3 sides to piece together the bottom. This is the only time I use that funky PVC wood. I keep the holes small, so I feel like it is OK to leave them open all the time. I haven't had any call backs yet, though sometimes I wonder if it is wise to claim that exterior storms will eliminate interior condensation problems.

Thank you so much for starting this group, my overarching passion is to merge the craftsmanship still intact in many older buildings with technology and building science.

John,

I'd also like to add to your "laundry list" a product that I have had some experience/frustration with, but ultimately hope for. http://www.solarizewindowinsulators.com/ It's dang intriguing if nothing else. I'd love to hear of other folks' experiences with the Inflector product.

It's basically a reversable interior storm window-- radiant barrier on one side, solar absorber on the other. It's brilliant in concept but I can't help thinking it looks like an overpriced NASA-designed trash bag.

My mother in law had three skylights facing south in her 1890's home-office. She loved the light, hated the heat, and wanted to save energy in the winter too. (Wow, that's a lot to ask of a hole in your ceiling). So I installed three Inflector panels. She hated the way they looked and took them out before I ever got any good data on their performance. I'm a little suspicious of their own data claims, as the product is outside the realm of a SHGC-defined window/ storm tests.

Hi Chris. Thanks very much for added this to the forum. The information and test data they provide seems rather substantial. But I agree with you -- it'd be great to hear from any one else who's installed these or a similar reflective barrier, and had had a chance to observe the results. Agree that it at least sounds good.

Here is my list of other professionally made interior air panels and interior "storms":

Downeast Interior Storms
Rendon Sabina
47 Chase Farm Rd.
Newcastle, Maine 04553
207.380.7680
rendon at downeastinteriorstorms dot com
http://www.downeastinteriorstorms.com/

Eugene Mueller
Energy Wise Mfg
563.542.2134
http://www.energywisemfg.com/insiders.html

Advance Energy Panels (AEP)
James Levine
(800) 819-9463
http://www.windotherm.com/index.htm
AEP now has kits to make panels:
http://www.advancedenergypanels.com/department/kits-3.cfm?killnav=1

R-Plus Window Insulators
http://www.proactiveenergyconcepts.com/proof.html

Indows
http://www.indowwindows.com/

Hi John,

Thanks very much for contributing all this information. It looks like a few of the links were broken when I tried them. In particular, the "Buy AEP -Kit" button is broken on both the Windo-Therm and AEP home pages and I couldn't find any other obvious links that worked. On the other hand, if you Google "Advanced Energy Panels Kit", quite a number of third parties who resell them are listed. Also, the Window-Therm and AEP home pages (one in the same) are either http://www.windotherm.com/ or http://www.advancedenergypanels.com/, respectively, while the R-Plus Window Insulators home page now seems to be http://rpluswindows.com/

There's a company right in Boston that makes a very nice aluminum/low-e glass spring tension interior storm that I've seen a few times, who's name just keeps on eluding me. I need to sift though some paper files to find it (never an exciting prospect), but when I do, I'll post here as well.

Thanks again, John, and hope all is going well by you!

~John

Both interior air panels and exterior storms are now included in the National Window Preservation Standards:

Air panels:

http://ptnresource.org/WPSC_forum/viewtopic.php?f=19&t=76

Storms:

http://ptnresource.org/WPSC_forum/viewtopic.php?f=19&t=184

John

www.HistoricHomeWorks.com

This is great, John. Thanks very much for posting these links here...

~John

Larson is a manufacturer with national distribution of interior and exterior storm windows. See:  http://www.larsondoors.com/storm_windows/ for more information.

It is indeed a challenge to retain those historic windows, etc. but I think any contractor can remodel it maybe by adding blinds, etc. nothing is impossible now.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Tom Conlon commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"I just checked the site Guidelines Kurt, and any true "promotions" should be posted in…"
12 hours ago
Tom Conlon posted a discussion

Whole House Fans - Love 'Em or Not?

I just searched this forum for "Whole House Fan", but I didn't find much about them (except …See More
12 hours ago
Richard Beyer replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"Don, Thank you for the praise! I only wish that some of these profiteers could answer my questions…"
15 hours ago
Richard Beyer replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"Todd, This report (attached link) below on poor people living in subsidized housing show's…"
15 hours ago
Mike Kandel added 4 discussions to the group Building Performance Institute (BPI)
17 hours ago
Mike Kandel posted discussions
17 hours ago
Nate Adams commented on Jim Gunshinan's blog post My Energy Upgrade California—The Numbers Are In
"Jim, Glad to help! OK, a touch of soap box. So long as we don't tell people EE is free and…"
17 hours ago
Kurt Shafer commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"Bob, Good idea. I see that you are a window energy reduction expert. You might consider adding…"
18 hours ago
Robert (Bob) Bacon commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"Kurt, I would explain what energy/efficiency problem this device solves and explain the science the…"
18 hours ago
Ben Jacobs replied to Mike Kandel's discussion Our Homes Suck – And That's Why Our Kids Have Sinus Problems
"I agree that in many homes the indoor air sucks.  However, a lot of this problem is caused…"
20 hours ago
Kurt Shafer commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"Tom, thank you for your odd reference to a leaky duck. It is a bit off topic since I was not asking…"
21 hours ago
Tom Delconte commented on Kurt Shafer's blog post What is your opinion about members promoting products here?
"Shameless self promotion here sucks like a leaky duck!"
22 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service