Hall of Shame Discussions (79)

← Back to Hall of Shame
Discussions Replies Latest Activity

preventing frozen pipes

Started by Kari Sauder

2 Feb 20, 2013
Reply by Bruce Helft

horizontal venting

Started by Kari Sauder

7 Jan 30, 2013
Reply by Bob Daley

Blown In Cellulose

This image was taken by The Snell Group team member John Snell. It's an infrared image he captured last winter of a structure that had re…

Started by Deanna Kaiser

5 Nov 22, 2012
Reply by Pat Dundon

Found a Critter

Found in Attic. Home owner response - I guess he got up here before I closed up that hole.

Started by John Nicholas

2 Dec 1, 2011
Reply by Evan Mills

Injection foam application

These photos were originally posted in a discussion by Erin Buchanan.   Here are examples of a few issues with the application of injection…

Started by Diane Chojnowski

0 Jun 14, 2011

Fix Your Roof Leak

Unfortunately, this isn't the first time I've seen this doing a WAP audit.    Fix that water leak. Seriously.  This is what happens if you…

Started by Joel Greenberg

4 Apr 30, 2011
Reply by Michael Dunseith

Icicles

Here is a picture of the house I audited last week.  These icicles aren't the biggest I've seen.  They do show the low level of insulation…

Started by John Nicholas

21 Mar 14, 2011
Reply by Evan Mills

attic vent termination

Someone ran out of vent pipe but made up for it with a cap and some asbestos...

Started by Neal Sistek

3 Mar 10, 2011
Reply by Stan Kuhn

How long should flex duct connections last?

3-4 years I guess.

Started by Andrew Vidal

2 Mar 10, 2011
Reply by Stan Kuhn

Recent Audit

I found all of these issues in the same 1985 home.   Obvious use of 1 drill bit per circuit by the electrical contractor.   This duct was d…

Started by John Nicholas

1 Mar 5, 2011
Reply by John Nicholas

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
9 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
9 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
12 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
13 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
14 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
15 hours ago
Lars olsen posted a blog post
23 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service