View
| Discussions Replied To (4) | Replies | Latest Activity |
|---|---|---|
"If any of the above software is based on manual J it already has a huge "fudge facto…"Bob Blanchette replied Jan 24 to Ceiling/attic temperature differentials |
12 |
Jan 25 Reply by Steve Waclo |
"The problem is it's difficult to calculate the temperature difference between the bo…"Bob Blanchette replied Jan 16 to Ceiling/attic temperature differentials |
12 |
Jan 25 Reply by Steve Waclo |
"If you are trying to figure heat load, the furnace should be operating at 100% when…"Bob Blanchette replied Jan 16 to Ceiling/attic temperature differentials |
12 |
Jan 25 Reply by Steve Waclo |
"Commercial grade registers can help a LOT with this, especially if they are located…"Bob Blanchette replied Jan 15 to Ceiling/attic temperature differentials |
12 |
Jan 25 Reply by Steve Waclo |
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
Orvil D Boyer joined allen p tanner's group© 2013 Created by Lawrence Berkeley National Laboratory.