Wanted, used Retrotec clothe blower door frame. Just the frame.
Anyone have a Retrotec clothe door frame that isn't being used now that they have upgraded to the rigid panels? I need a frame. The clothe doesn't have to be perfect -- I can replace it. I just need the frame.
I have the blower, controller, gauges, -- its just the frame I need.
This will be used for research project AND on my house as I tighten up the envelope. It will be used a lot - but never have to travel far... :-) Thus the door frame case while nice isn't absolutely required.
dennis [-at-] heidners [a-dot] net
Views: 38
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Mark Richardson replied to J.C. Martel's discussion Disasters & sustainable energy
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water HeaterBachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT CansBachi Brunato's discussion was featuredBoxing and Insulating Around Non-ICAT Cans
Johnny Ritzo's discussion was featuredSelecting a Water Heater
George Kopf's discussion was featuredMisting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation
Tom Delconte's blog post was featuredThe Surroundings Are Comprised of (fill in the blank) !
Christopher Morin's blog post was featuredSelling with Rebates: The Simple Payback
Mike Rogers's blog post was featuredHOMES Act introduced with Bi-Partisan Sponsorship
Mike Rogers posted a blog postHOMES Act introduced with Bi-Partisan Sponsorship
© 2013 Created by Lawrence Berkeley National Laboratory.
