I am no longer in business. I bought  all this equipment in 2010. I also have 10 Vent caps and two 20 ft Duc-Bloc vent covers for sealing air ducts. All equipment in excellent condition and guaranteed to pass calibration. I also have the field cal plate for the duct blaster. I would prefer a local buyer so I don't have to ship this equipment. I am in the Monterey Bay/ San Francisco Bay area. Thanks for your interest.

David Parker

Parker Energy Solutions

Views: 925

Attachments:

Replies to This Discussion

I'd be interested in your combustion analyzer, and would gladly pay for shipping.  I've made you a "friend" so we can exchange private messages.

Hi, I'm I interested in buying your duct blaster. Let me know how much you are looking to sell it for. You can email me at devonpkelly@gmail.com and I'm not too far, in the Bay Area, I could come down and pick it up.
Thanks,
Devon
David,

Any luck selling the equipment? I'd still be interested in your combustion analyzer.

If you still have the Duc-Bloc covers, I'd love to buy them. Contact me via email: pohaku2@gmail.com

I am interested on the Minneapolis. Do you still have it? Let me know. Thanks. Alfredo
You can reach me at alfredo@e3-elements.com
I'm interested in the borate door if it's still available. robert@meekerenergy.com 559-799-4817

still have the duct blaster?

Yes, I do but I have decided to hold onto my equipment for now. I may try again later this year. Thanks for your interest.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
5 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
5 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
8 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
8 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
9 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
11 hours ago
Lars olsen posted a blog post
18 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service