Hi Folks,

   I have decided to retire and hopefully some lucky person will be able to take advantage of the tools I have. I bought these tools 2 years ago brand new.

1. ENERGY CONSERVATORY BLOWER DOOR W/ DG700 W/ USB PORT AND XTRA HOSE KIT, PADDED CASE                                                                                                                      2400.00

2. ENERGY CONSERVATORY DUCT BLASTER W/ DG700 W/ USB PORT                       1500.00

3. ENERGY CONSERVATORY LARGE AND SMALL PRESSURE PANS                              150.00

4. FLUKE TiR INFARED CAMERA EXTRAS INCLUDE CAR CHARGER AND SUNSHEILD 3600.00

5. TSI ACCU BALANCE MODEL 8371                                                                                      2700.00

6. 20 PC ZIP POLES AND DUC BLOCS                                                                                   1500.00

7.BACHARACH FYRITE TECH 60 COMBUSTION ANALYZER                                                400.00

8. BACHARACH INFORMANT 2 LEAK DETECTOR W/ RUBBER CASING AND FLASHLIGHT HOLDER                                                                                                                                      300.00

9. INSULATION GRABBER                                                                                                          45.00

10. 2 3/8" TELESCOPING LED LIGHT, INSPECTION MIRROR                                                 10.00

THAT'S ALL FOLKS

EMAIL ME JUDI@SHEBUILDSGREEN OR CALL 818.625.0987

THANKS FOR READING AND CONSIDERING.

Views: 456

Replies to This Discussion

Judi,

If you still have it, I would be interested in your combustion analyzer for $400.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
7 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
7 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
10 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
11 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
12 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
13 hours ago
Lars olsen posted a blog post
20 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service