What are inspectors using to detect the type of lighting found in residential applications? I need a meter to help detect CFL and LED lights so I don't have to get a ladder and remove shrouds.

Thanks.

Tags: CFL, light, lighting, meter, tools

Views: 82

Replies to This Discussion

If the question is "incandescent vs. compact fluorescent" OR "cfl vs. LED" -- then a diffraction grating will help. Go to a toy store and find the little cardboard glasses with plastic lenses that make every light bulb look like a rainbow.

See the attached handout. Incandescent lamps radiate across all visible wavelenghts, so in a diffraction grating you see a spectrum of colors all blended together. CFL's have 4, 5 or 6 phosphors blended together. The lamp makes light that we see as "white", but in fact each phosphor radiates at a very specific wavelength. Through a diffraction grating, you can see multiple images of the light source, each with the different color produced by that phosphor.

WHITE LEDs are doped to radiate across most of the visible spectrum. So a diffraction grating shows the same "smeared" continuous specturm as an incandescent bulb.

You can see this effect even if the lamp is in an enclosed luminaire -- the image of the luminaire will take on the property of the light source inside it.

So, in an older home that has not seen dedicated energy efficiency work recently, the question is probably "incandescent or CFL?" A diffraction grating will show the difference. In a home where the owner pursues energy savings, the question is probably "CFL or LED?" A diffraction grating will sort them out. If the space could well have incandescents AND LED lamps -- good luck.

Attachments:

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Richard Beyer's discussion Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"
""fire origin had overheated and ignited during the curing process." No attorney…"
5 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Different houses, different problems, different approaches. A multipoint gives you a slope. The…"
14 hours ago
John Nicholas replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Bud,  I pretty much agree with Sean's points.  Given the time it takes to set up the…"
14 hours ago
Bud Poll replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"A multi-point will take longer, but what will it do for the home owner?  Will it change the…"
16 hours ago
Sean Lintow Sr replied to Sean Lintow Sr's discussion Blower Doors & Methods Used in the group Best Practices (Residential)
"Hmmm good question - personally for air-leakage I would go with multi-point, preferably run from…"
18 hours ago
Richard Beyer posted a discussion

Media Reports Spray Polyurethane Foam Insulation spontaneously combusted a $5M Connecticut Home... "The Conclusion"

OFFICE OF THE FIRE MARSHAL1212 WHITTEMORE RDMIDDLEBURY, CONNECTICUT Fire Investigation Report –…See More
yesterday
Profile IconDavid Hepinstall and Matthew joined Home Energy Pros
yesterday
Steve Leombruno posted a blog post

Static power energy box

Just wondering if You've heard of this Static power energy box that boasts energy consumption…See More
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service