Like the title says, I have three sets of equipment for sale: 

 

1. Used Minneapolis Blower Door and Duct Blaster set

2. Used Retrotec Blower Door and Duct Tester set

3. New, never been used Retrotec Blower Door and Duct Tester set.

 

All of the sets come with two monometers/gauges.  In the interest of time I have not listed all the details for each set.  I thought I would see if there is any interest and then toss in the details if there is interest.

Thanks for taking a look!

Tags: Equipment, For, Minniapolis, Sale, Testing

Views: 1579

Replies to This Discussion

Here is a picture of the Retro set up also.

  Hey Brooke, let me know  what dollars you need for the sets.

We may have need for some replacement Retrotec because someone decided they needed to take ours.

Im in Seattle, hope all is going well for you. Shawn

We will figure out how to PM me.

Shawn! Great to hear from you.  Go ahead and email me at maryjaneshouse@hotmail.com and I can send you my phone number.  Thanks!

Brooke, I am interested in the Retrotec Blower Door set and Duct Tester set. How can I get details & price? Thanks, Kip 

Kip,

Thanks for your reply.  I apologize for my delayed response.  My schedule became extremely busy.  You can message me and I will give you my phone number to go over the details of each set, but the pricing is as follows:

New, never been used Retrotec: $4200.00

Used Retrotec: $3700.00

Used Minneapolis: $3500.00

All of these prices include shipping and are negotiable based on the shipping location and costs.

Kip, I see that you are located in Oregon.  I am also in Oregon.  We could definitely discuss some lower prices and possibly get the equipment delivered in person if you are still interested of course. :)

Would you be interested in selling just the MB ductblaster kit? Let me know thanks - stuart@airtightinspections.com

If you could send me the cost of the Minneapolis Blower Door and Duct Blaster set I would appreciate it. You can email me at devonpkelly@gmail.con
Thanks,
Devon

i imagine you have sold everything by now

but if you haven't i a interest in the minneapolis duct blaster

however, i am in ohio, so shipping might be expensive.

Dwayne,

Actually, I do still have the Minniapolis set.  Shipping shouldn't be a problem.  I will message you with my phone number.

Hi, do you still have the Minneapolis set?.. Let me know. Thanks. Alfredo
You can reach me at alfredo@e3-elements.com

do you have any duct blasters available?

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Morgan, I got this below from the Knight installation manual. I note a few things, -These…"
1 hour ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
15 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
15 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
17 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
18 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
19 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
20 hours ago
Lars olsen posted a blog post
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service