My 3 years are up on my BPI Analyst and Envelope Professional certifications this fall, and I am trying to get a handle on if there are any proctors in this part of the world.  And it occurred to me that this information is generally not that easy to find. The BPI site (www.bpi.org) provides a list of companies that have certified professionals, but it doesn't say who they are or if they are proctors.  New York State has the Building Performance Contractors Association (http://www.home-performance.org/).  We could put together a chapter of that group.

I would at least like to put together a list of people who are BPI certified in  this part of the world.  Also, there is a lot of stuff going on with BPI and the new certifications that might be worth discussing as a group.  So if you know certified professionals who could benefit from being listed or part of this group (or a proctor for my recertification), please ask them to send me the information and I'll put together a list. 

I am a proctor for Analyst, Envelope, Heating, and AC/Heat Pump.  I do my testing through the University of Massachusetts at Dartmouth as a test center.

Tags: BPI, Certification, Proctor

Views: 247

Replies to This Discussion

I time out in about a year.  I expect not to renew because I have not been doing the work in houses.

That said, I will always be one who cleared a BPI bar and my involvement with the 1000 Home Challenge will continue.  For many years, I will be available for teamwork addressing house/residents/community as a system.  

I would like to be on the list, and the local/regional list might be a good place to share continuing education or community volunteer and other projects.

Joe Hughes

j.hughes@capesave.com

Great, Joe. I have added you

Ok, Again I have no "watch" button.  This time I took screen shots to prove I'm not missing it. 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
13 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
13 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
15 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
16 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
17 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
18 hours ago
Lars olsen posted a blog post
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service