Or does BPI strictly come from performance and testing base with no preference as to how to compile assessed data? Any BPI certified folks have any insight? I am curious since a lot of rating/ certification programs and well as incentive based programs require energy modeling of some type.
Tags:
Hi Sean,
BPI has a standard - BPI-2400-S-2011 Standardized Qualification of Whole House Energy Savings Estimates, that outlines the process for the calculation of standardized estimated savings on a home performance job, however BPI doesn't specify what software to use, or approve software.
Please see the standard here.
Permalink Reply by Sean Feurtado on August 20, 2012 at 8:56am This is good enough for me, for now, thanks!
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Bachi Brunato's discussion was featured
Johnny Ritzo's discussion was featured
Tom Delconte's blog post was featured
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase© 2013 Created by Lawrence Berkeley National Laboratory.