In the interest of reducing the training burden on our accredited contractors and programs, BPI will postpone referencing ASHRAE Standard 62.2-2010 - Ventilation and Acceptable Indoor Air Quality in Low Rise Residential Buildings in BPI's standards and certifications. ASHRAE is expected to publish an updated 62.2-2013 standard, which includes several significant changes, in the spring of 2013. 

Click here to read more.

Tags: ASHRAE, BPI, PostPone, Standard

Views: 57

Replies to This Discussion

Hi all, I was expecting this but this should have little impact on the nationwide Weatherization Assistance Program (WAP) as ASHRAE 62.2 is still a requirement under WPN11-6 for all weatherization agencies. NYSWDA will continue to train 62.2 2010 and will update the training for 62.2 2013 when it's mandated. We will continue to schedule ongoing New York State WAP 62.2 trainings so please go to our training calendar at www,nyswda.org. for our 62.2 training schedule. We will begin preparations for 62.2 trainings for all NYSERDA contractors when BPI formally announces the implementation of  the standard. Happy New Year......

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"  I think that this study  may be more to the point on problems in "selling…"
1 hour ago
Ben Jacobs replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"I think that most homeowners lack proper education on the proper way to achieve significant…"
2 hours ago
Profile IconBoonPing Lim, Martin Easley and Richard Vito joined Home Energy Pros
2 hours ago
Tom Delconte posted a discussion
4 hours ago
Tom Delconte replied to Johnny Ritzo's discussion Selecting a Water Heater
"J: natural gas is the cheapest, at least until prices skyrocket. Nearly everyone has gotten rid of…"
4 hours ago
Jeena Smith commented on Molly Banton's blog post Install a Pellet-Burning Fireplace Insert and Save Money
"Fireplace burning insert must be of very good quality. It should be a combo of lower price and high…"
10 hours ago
Johnny Ritzo posted a discussion

Selecting a Water Heater

I am looking at updating the heating and water heating systems in a rental home I recently…See More
14 hours ago
Eric Kjelshus replied to Patrick Michaelyan's discussion Hot Upper Stories
"When I am asked to fix this home.   I start with a Heat Loss and gain, blower door IR  sq…"
16 hours ago

Edward Foskey just added their location.
(via Member Map)

21 hours ago
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
yesterday
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"If you can't talk them into replacing with IC rated... Look into Tenmat - those are designed…"
yesterday
Bachi Brunato posted a discussion

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
yesterday

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service