ACI was an interesting conference with a lot of great vendors exhibiting, but one had me stumped. The company was called ShowerStart & they have a product where you turn on the water & as soon as it hits 95 its slows the flow to a trickle. Once you hop in, you pull the lanyard & essentially you have hot water & saved a bunch that would have gone down the drain.

Personally I like recirculating systems & consider water the next big thing to watch (which for some parts of the country it already is) but would love to hear your thoughts - is it something you would recommend / even use yourself or just a gimmick?

For links & more

Views: 1107

Replies to This Discussion

Jim - The last iteration of the chilipepper is what you have heard about. It has been reengineered and is no longer loud and has longer lifespan. I dont know how you can think it is difficult to install. All you do is disconnect the two shut offs and put it between the two. The hardest thing is access to an electrical outlet which may have to be installed if not present, which is the same as the metlund product. Chilipepper was actually created by the guy who originally designed the Metlund system. It is actually on the order of three to four times more powerful which moves the hot water faster. Its also about 4 times less expensive as the metlund and can be self installed by anyone that has any home improvement know how. I'm not affiliated at all, I have just researched this topic extensively and have experience with both. I dont like paying 4 times the amount for a product that does the same thing. The metlund could very well have the durability edge but even if the warranty didnt cover your issue, you could buy 4 more of them!

Thanks for the re-iterations. Early in 2011 a friend, also an energy auditor, slipped a chilipepper into her plumbing. And OH what a relief!

Water bills dropped; kids love it. Even the noisy iterations had value -You KNOW when it's done and the water is hot and waiting because the racket stops! Kids LIKE that. Like when the doggie stops barking, we wag into the shower.

Happy campers are made of this.

One of the obvious problems with the device... is the use on installations in which the owner has previously installed thermostatic valves in the showers.  I use Grohe's thermal (Grotherm) controls.  We generally set the temperature at about 85F and that's where the water stays...  No value in the kit above.   For long runs using a chilipepper using either a dedicated return or the cold water return - works great.   I trigger my chilipepper when any of the bathroom light switches are turned on.  The recirc pump is located near the cluster of bathrooms.   Very little waste water and the shower temps are extremely stable.

Interesting side note... since I'm used to taking cooler showers - that seems to have caused some problems in a few of the German hotels that we've stayed at.  Most of the 3+ star hotels also use thermal controls for the showers.. and I'd set the show temp at about 25C-30C.  Two days in a row we had maintenance people coming up with immersion thermocouple probes and meters to verify the correct observation of the shower... because the cleaning staff noticed the temp was set at 25C instead of the higher temps that many of the Europeans like...  :-)

Any way to save water, especially HOT water, is worth checking out. I would personally be an advocate for more on demand/point usage hot water systems. Or just recycling grey water. In Iowa you are not allowed to collect grey water.

If you travel outside of the US you will see lots of great ways to save and use less water in general. Why aren't double flush toilets required for code. One would think places like California would be all over regulating water usage.  

Grey water can really be a problem if it sits too long in the pipes or the back of a toilet.  That soap or extra stuff that makes it grey water really needs to be filtered out and processed before re-use.  Bacteria such as legionella is not filtered - so you might have to use a UV treatment to sterilize the water.   Then in areas where grey water is used - they often require a unique water line that carries it two the grey water use fixture (toilet tank) and the faucet needs to be clearly identified as non-potable water.  In rural areas the AHJ may not have people trained to look at the system to see if properly installed, they may not have the people to test it,  or they simply feel that water isn't an issue.

As for where the water goes after re-use... that again depends on the region - is the house on a septic field or muni water treatment.  If septic system - that means the water eventually recharges the aquifer.   If going through a waste treatment plant - the water may be processed then reused in agriculture applications. 

In California - the issue is more of who should get priority access to the water:  Agriculture, industry, commercial buildings,  energy production, residential use.... or recreation....  that a political / public policy issue.

The problem is these devices NEVER pay for themselves. Water is cheap, about $3 per 1,000 gallons in our area. Natural Gas is also cheap, you can run a water heater for a month for about $10 in NG.

However the Fixed FEES are expensive for both NG and Water. High monthly service charges that don't go down when you less water/gas are killing the home efficiency industry. Want people to conserve? Charge lower monthly service charges and more for the water/gas.

RSS

Videos

  • Add Videos
  • View All

Twitter

Latest Activity

Profile IconAlfonso Scott, Susan Benford, HomeWiz and 2 more joined Home Energy Pros
7 hours ago
Hannah Wood added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Healthy Home Evaluator (HHE) certification + recorded webinar

Thanks to those of you who joined BPI's webinar on the Healthy Home Evaluator certification…See More
7 hours ago
Michelle Usher posted a blog post

Addison Homes Wins Pinnacle Award for Best Achievement in Energy Efficiency

Addison Homes was amongst the home building industry’s best and brightest honored with a 2016…See More
7 hours ago
Eric Kjelshus replied to Beverly Lerch's discussion Fireplace drafts
"A brick chimney will take some 70,000 BTU's to heat up to draft on a fireplace.   A…"
19 hours ago
Ed Voytovich replied to Beverly Lerch's discussion Fireplace drafts
"Our solution was to install a Lopi Answer wood burning insert that vents directly through a metal…"
yesterday
Jim Gunshinan's blog post was featured

A Healthy Home and a Healthy Bottom Line

There has been a lot of interest of late in the weatherization and broader home performance…See More
Monday
Jonathan Beers commented on Home Energy Magazine's blog post Natural Gas is Becoming Less Attractive
"The carbon intensity of electricity use (lbs. of CO2/MWh) varies a lot from region to region. For…"
Monday
Diane Chojnowski posted events
Monday

© 2016   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service