In an earlier post, I talked about 3 of the most important strategies for making a home energy efficient. They were; 1. Air sealing, 2. Air sealing, and 3. Air sealing.

Air sealed, or tight, homes do a better job at containing the conditioned air coming from the HVAC system where it belongs…inside. Tight homes also keep the unwanted hot/humid or cold/dry outdoor air where it belongs…outside. Both of these keep your HVAC system running less, which ultimately reduces your energy bill. In other words, the home is more efficient.

Fresh air should be brought in to the home through mechanical ventilation, which maintains proper levels that fresh air, and can also filter and condition it depending on the type of ventilation strategy employed in your home.

By the way: Tight homes also do a better job at keeping moisture, pollutants, sound and insects from getting!

Stopping Air Flow

If you’ve read Part I and Part II of this series, you’ll remember this detail (below). In the earlier posts, we point out our strategies for controlling moisture and heat flow at the slab-on-grade condition of the Proud Green Home at Serenbe. Today, it’s all about air sealing. (Note: this detail is for a home in North GA, or Climate Zone 3A. Local conditions vary, and each home should be designed for it’s local climate)

Designing for High Performance Slab-On-Grad Part III Controlling Air Flow

The 1″ Zip System R-Panel is made up of the widely used Zip System wall sheathing and a 1/2″ layer of EPS foam insulation. Each of these materials are well know air barriers on their own, but have been brought together in to a single product to act as a structural component, air barrier and thermal break. As is done with their sheathing, Zip Systems Tape is applied to all seams between each panel and at all penetrations. Windows are given extra attention to properly flash so as to prevent air and/or water from finding it’s way back in to the building.

The Zip System Tape not only performs very well at all sheathing seams and penetrations, but it also adheres very well to concrete. In fact, it is one of the better products for this application. We are applying a continuous strip of the tape at the bottom of the R-Panel where it meets the foundation wall. This will prevent air flow at the base of the panels.

The sill gasket shown below the bottom plate, in conjunction with the continuous Zip Tape at the exterior seam between the plate and slab, works well at an area know for a lot of infiltration. We’re also going to be applying a continuous strip of the tape on the inside of the wall at plate-slab junction to provide insurance for a tight seal. Similar attention will be paid to the top of the wall where we will have double plates. Another prime location for air leakage.

Above the slab

In the walls, you will see we will be completely filling the cavities with expanding open-cell spray foam. When installed properly, spray foam will not only insulate our walls but will provide an excellent air barrier in and around the entire cavity.

Finally, we’ve chosen Marvin’s Integrity Windows because of their durability and low air leakage rate. We will install sealant on the back side of the window fin before placing it in the opening. Then, we will use expanding foam between the window and the sill, jambs and head.

Tags: air, controlling, design, efficiency, energy, flow, high, performance, sealing

Views: 2824

Replies to This Discussion

I like that detail of the Home Slicker over the Zip system which eliminates one of my concerns of water being able to collect on the tape ridge plus you add the drainage plane - nice piece & explanation

Any testing for sheerwalls out on these panels yet?

Thanks, Sean.

Here is the ICC-ES report for the R-Panel. They are still working on testing it to use as roof sheathing...still working...

http://www.zipsystem.com/uploads/technical-tips/ESR-3373%20(6-1-12)...

What is the average cost per square foot of the ZIP panel and can I find this product in the intermountain region.

Does the insulated Zip R-panel allow water vapor to pass to the outside, for cold climate installation?

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Home Energy Magazine posted a discussion

Let's Talk Gender

It’s no secret that home performance is a male-dominated industry. Attend any industry conference…See More
1 hour ago
Mark Rogers added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Retrotec Blower Door Kit $1800

Retrotec Blower Door Kit complete with:DM2 Mark II digital manometer & automated fan…See More
1 hour ago
Maria Lacey replied to Jamie Kaye's discussion Flickering LED lights
"I think the tendency is to look at lamps (light bulbs) as though they're the same if they all…"
1 hour ago
tedkidd commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
"Absolutely agree Ben, "How much do I use, how much do others use, and what is my reasonable…"
2 hours ago
Profile IconTauran Ivall, Alex Burnham and Annika Brink joined Home Energy Pros
3 hours ago
David Eakin replied to Jamie Kaye's discussion Flickering LED lights
"I also thought that, but I tried to put a CFL in the A-19 outside fixture at my…"
3 hours ago
Ben Jacobs commented on Scott Mellberg's blog post Lessons from Energy Efficiency Advisors: Getting Homeowners Onboard with Home Performance
" I believe a major problem of government, of energy utilities, and home energy efficiency…"
4 hours ago
Jill Lindman posted an event

EEBA Houses That Work Education & Training at Johnson County Administration Building

August 22, 2014 from 8:30am to 4:30pm
About the SessionsIntro to Houses That Work: In this session participants learn how the many…See More
5 hours ago
Glen Gallo replied to Tom Conlon's discussion Whole House Fans - Love 'Em or Not?
"Title 24 requires whole house fans in zones 8-14 in the prescriptive path only. With many…"
6 hours ago
Jenn Saunders replied to Jenn Saunders's discussion iEnergyApp: Quickly generate professional reports for homeowners and get more contracts!
"Hey Tom, You are most welcome.  iEnergyApp is not free, but it is reasonable and pays for…"
6 hours ago
Jenn Saunders posted a photo

Automatically Generate Clean Simple Reports for Homeowners

Stop spending hours cropping and resizing images, formatting and reformatting a Word document to…
6 hours ago
Eric Sperline added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Beware ebay seller "supermomofps"

I bought a blower door system on Ebay from "supermomofps"  The item was never sent and…See More
7 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service