Attempting to identify fireplace outside air intake
Wood burning fireplace on 13 year old home in Wisconsin. Exterior wall with cantilevered chase. During blower door test I found noticeable air leakage to the inside from above the metal firebox. Would naturally suspect air leakage from the top and back of the chase. However, there are 2 air intakes on the chase - one is for outside air to the firebox as expected. The other one seems to be just an open vent to the chase. Outside air was freely entering the 2nd vent and into the home while building was depressurized.
Anyone know what this vent is for, and does it need to be there?
I don't have a picture, but the two exterior vents were side by side. Sorry too that I don't know the make of the fireplace. They have no complaints with the fireplace area, but I'd like to know.
Thanks,
John
Views: 724
Replies to This Discussion
-
Permalink Reply by Armando Cobo on -
I imagine is pretty hard to tell much without the brand and its installation instructions to know what was required for that particulare fireplace model; not all fireplaces are built nor installed the same. It'll be interested to know how well sealed and insulated were the cantilever and chase before installing the firebox.
Does this home has a second direct vent fireplace between the 2 side windows?
-
-
Permalink Reply by John Shillito on -
That is correct Armando.
I'm sure we won't be doing anything intrusive with regard to the chase, but I'd like to know if we could seal off the vent, as that was certainly a pathway for outside air to enter into the home.
-
-
Permalink Reply by Simon Craig on -
Yes. Its correct.
-
-
Permalink Reply by Ed Voytovich on -
John: The chase is unlikely to have been treated as "conditioned" space by the builder. If it is not air sealed it performs basically like a small garage with a fireplace instead of a car in it.
Current code requires an air barrier in the fireplace chase, but I have never succeeded in retrofitting a chase like the one shown in your picture.
-
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
John Abdo just added their location.
Nick Helmholdt replied to Joshua Knittel's discussion Google Thermal View? in the group INFRARED THERMOGRAPHY USERS"Any bets on how long it will take this company to land in court?
A local energy efficiency group in…"
Matthew Redmond posted a status"Full house for NYSWDA's ASHRAE 62.2 course today. A lot of discussion on implementing this standard on NY State's diverse housing stock."
Paul Scheckel posted a blog postLess oil, more courage: Energy and Art
Hard to admit, but I'm not all fun-facts all the time. Sometimes I even pay attention to things…See More
Tom Delconte posted a blog postThe Surroundings Are Comprised of (fill in the blank) !
In Building Science…See More
tedkidd replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Pat, I think you and I agree on a LOT of things.
One thing I don't want to see is more…"
tedkidd commented on Tom Delconte's blog post Robert Shiller Says Retrofits Are Never Worth It!"Bob B.
Buying a home is a good investment because it is forced savings more than a good…"
Joe Huang posted a discussionWhite Box Technologies launches Web-based weather data for building energy simulations
White Box Technologies is pleased to announce under agreement with ASHRAE the launch of WBT Weather…See More
Joseph Lamy commented on Jim Gunshinan's blog post The Universe Is Made of Stories"My life changed when I got 'ductalatored' - became familiar with proper sizing guides for…"
© 2013 Created by Lawrence Berkeley National Laboratory.
