Attempting to identify fireplace outside air intake
Wood burning fireplace on 13 year old home in Wisconsin. Exterior wall with cantilevered chase. During blower door test I found noticeable air leakage to the inside from above the metal firebox. Would naturally suspect air leakage from the top and back of the chase. However, there are 2 air intakes on the chase - one is for outside air to the firebox as expected. The other one seems to be just an open vent to the chase. Outside air was freely entering the 2nd vent and into the home while building was depressurized.
Anyone know what this vent is for, and does it need to be there?
I don't have a picture, but the two exterior vents were side by side. Sorry too that I don't know the make of the fireplace. They have no complaints with the fireplace area, but I'd like to know.
Thanks,
John
Views: 722
Replies to This Discussion
-
Permalink Reply by Armando Cobo on -
I imagine is pretty hard to tell much without the brand and its installation instructions to know what was required for that particulare fireplace model; not all fireplaces are built nor installed the same. It'll be interested to know how well sealed and insulated were the cantilever and chase before installing the firebox.
Does this home has a second direct vent fireplace between the 2 side windows?
-
-
Permalink Reply by John Shillito on -
That is correct Armando.
I'm sure we won't be doing anything intrusive with regard to the chase, but I'd like to know if we could seal off the vent, as that was certainly a pathway for outside air to enter into the home.
-
-
Permalink Reply by Simon Craig on -
Yes. Its correct.
-
-
Permalink Reply by Ed Voytovich on -
John: The chase is unlikely to have been treated as "conditioned" space by the builder. If it is not air sealed it performs basically like a small garage with a fireplace instead of a car in it.
Current code requires an air barrier in the fireplace chase, but I have never succeeded in retrofitting a chase like the one shown in your picture.
-
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Bud Poll replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"This is a topic I have discussed many times, but unfortunately cost is all too often the deciding…"
Sean Lintow Sr replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans"If you can't talk them into replacing with IC rated...
Look into Tenmat - those are designed…"
Bachi Brunato posted a discussionBoxing and Insulating Around Non-ICAT Cans
I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
Dennis Heidner replied to Patrick Michaelyan's discussion Hot Upper Stories"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Amen, make energy show it's true cost instead of subsidizing it.
We have some of the lowest…"
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"The press report really doesn't give enough information to clearly answer why they are…"
Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Gustavo,
Thanks for the input. I agree with you in that I will be waiting till my system's…"
Gustavo Melo commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Any system that is out of warranty is really a coin toss as to whether it is financially better to…"
Dennis Heidner replied to J.C. Martel's discussion Disasters & sustainable energy"Such as Greensburg…"
Tom Delconte commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Thanks, Ed, I get it now. I would just put in what my hvac guy tells me to put in: a $17,000…"
© 2013 Created by Lawrence Berkeley National Laboratory.
