All Discussions Tagged 'performance' (3)

← Back to Best Practices (Residential)
Discussions Replies Latest Activity

Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We're just a few weeks away from a computer generated, self-guided interactive virtual tour of the Proud Green Home at Serenbe, a design-bu…

Started by Chris Laumer-Giddens

6 Aug 30, 2012
Reply by Sean Lintow Sr

Designing for High Performance: Slab-On-Grade, Part III – Controlling Air Flow

In an earlier post, I talked about 3 of the most important strategies for making a home energy efficient. They were; 1. Air sealing, 2. Air…

Started by Chris Laumer-Giddens

4 Aug 30, 2012
Reply by David Williams

Part II: Designing for High Performance, Controlling Heat Flow in Slab-On-Grade

In Part I of this series on designing for high performance, we discussed the control of moisture flow at foundations. We showed you this de…

Started by Chris Laumer-Giddens

3 Aug 23, 2012
Reply by Bud Poll

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Jerry Lawrence posted events
11 hours ago
Morgan M Audetat replied to Bryan Pringle's discussion Dense packed cellulose in basement?
"Right you are. You have to ask: what will the cellulose contribute.  Here in Minneapolis we…"
12 hours ago
Morgan M Audetat replied to Tony Hicks's discussion Slab-on-grade Insulation
"All slabs float. We have been installing radiant floors on various slab constructions since the…"
12 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"2" XPS foam. I'd love an R-20. Having foam thick enough to get an R-20 would be…"
13 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"Sorry, I did missed the "siding nailed directly to the framing", my grandfather would…"
14 hours ago
Morgan M Audetat replied to Larry Schaffert's discussion How to correctly insulate exterior wall in a 1900 house?
"My own farm house is sided with 1/2" t&g pine boards and vinyl. We foamed then from the…"
14 hours ago
Tony Hicks replied to Tony Hicks's discussion Slab-on-grade Insulation
"Great thought! I think that would work. I'll have to put the cost together and see where I…"
14 hours ago
Danny Gough replied to Tony Hicks's discussion Slab-on-grade Insulation
"This is a tough detail because the foam on the edge of a slab doesn't provide sufficient…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service