All Discussions Tagged 'flow' (3)

← Back to Best Practices (Residential)
Discussions Replies Latest Activity

Designing for High Performance: Slab-On-Grade, Part I – Controlling Moisture Flow

We're just a few weeks away from a computer generated, self-guided interactive virtual tour of the Proud Green Home at Serenbe, a design-bu…

Started by Chris Laumer-Giddens

6 Aug 30, 2012
Reply by Sean Lintow Sr

Designing for High Performance: Slab-On-Grade, Part III – Controlling Air Flow

In an earlier post, I talked about 3 of the most important strategies for making a home energy efficient. They were; 1. Air sealing, 2. Air…

Started by Chris Laumer-Giddens

4 Aug 30, 2012
Reply by David Williams

Part II: Designing for High Performance, Controlling Heat Flow in Slab-On-Grade

In Part I of this series on designing for high performance, we discussed the control of moisture flow at foundations. We showed you this de…

Started by Chris Laumer-Giddens

3 Aug 23, 2012
Reply by Bud Poll

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
1 hour ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
2 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
3 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
4 hours ago
Lars olsen posted a blog post
12 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
22 hours ago
Hans Joachim Preiss replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Good discussion. I came across this comprehensive presentation by Gas Consultants on the effects at…"
23 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Excellent reply Hans. I think that there isnt' a good general answer to this question but that…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service