Bud Poll's Discussions (518)

Discussions Replied To (31) Replies Latest Activity

"As long as the tape is good I would be confident that most rigid foams would be wate…"

Bud Poll replied Jan 22, 2013 to To tyvek or not to tyvek... that is the question

3 Jan 22, 2013
Reply by Bud Poll

"I'm not trying to stir the flames, but it is quicker if I just spit these out. Bob &…"

Bud Poll replied Jan 22, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"Hi Sean, besides the cost issue, I would like the tyek to perform a real function. S…"

Bud Poll replied Jan 22, 2013 to To tyvek or not to tyvek... that is the question

3 Jan 22, 2013
Reply by Bud Poll

"Bob, I want to continue this and I also want to hear from anyone in regards to the o…"

Bud Poll replied Jan 22, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"If my conversion to pascals is correct, that would be a static pressure of 20 pa, 10…"

Bud Poll replied Jan 5, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"I will definitely be running a smoke test on my ridge vent when installed, but that…"

Bud Poll replied Jan 5, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"Note, I forgot the constant in the pressure equation.  Should be: p (pa) = 0.007 x ▲…"

Bud Poll replied Jan 5, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"LOL, I now see the difference in our perspectives, hot climate vs cold climate.  The…"

Bud Poll replied Jan 5, 2013 to Ridge Vent NFA

15 Jan 5, 2013
Reply by Bob Blanchette

"Again you are presenting your opinion, where's the support? The static pressure in a…"

Bud Poll replied Jan 5, 2013 to Attic ventilation with mixed soffit heights.

34 Apr 17, 2013
Reply by Bud Poll

"Bob, if you are going to make statements like this, I have to ask for something more…"

Bud Poll replied Jan 5, 2013 to Ridge Vent NFA

15 Jan 5, 2013
Reply by Bob Blanchette

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Energy Center University posted an event

Better Buildings: Better Business Conferences at Crowne Plaza Chicago O'Hare Hotel & Conference Center and Kalahari Resort and Convention Center

February 26, 2015 to March 13, 2015
Better Buildings: Better Business ConferencesFebruary 26−27, 2015 │ Rosemont, ILMarch 11−13, 2015 │…See More
14 hours ago
Kris Grube added a discussion to the group Job Board
Thumbnail

Good Energy Retrofit, Portland, Or. Hiring Home Performance Salesperson.

Good Energy Retrofit is a small and focused, woman owned and operated, specialty residential…See More
18 hours ago
Benjamin Gromicko posted events
19 hours ago
Nate Adams joined Diane Chojnowski's group
Thumbnail

Hall of Shame

In this group, members share an array of images from the field, showing the kinds of issues…See More
19 hours ago
tedkidd commented on Diane Chojnowski's group Hall of Shame
"Give this thread a bump - here's my "bad" album and some of the…"
20 hours ago
Eric Kjelshus commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"6) Radiant barrier- under the gravel is just a barrier but with holes each square inch its not a…"
20 hours ago
tedkidd replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"It is very common to find equipment grossly oversized. I mean 1.5 - 2x Manual J and 2-3x the size…"
20 hours ago
tedkidd replied to Luis Hernandez's discussion Basic Heat loss information in the group TREAT Software
"Luis,  Click "selected reports, energy savings and use, design heating and cooling…"
20 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service