Permalink Reply by Emily Rogers on May 17, 2012 at 1:42pm Hi Robert,
I checked with our technical department here and they believe Table 4A would be the one used for an insulated roof.
Hope this helps.
Permalink Reply by Isaac Savage on April 11, 2013 at 10:24am Yes. It does. Which software are you using to model your projects? If you're using RightSuite (aka Wrightsoft) I can give you some guidance.
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Christopher Morin's blog post was featured
Mike Rogers's blog post was featured
Mike Rogers posted a blog post
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
Orvil D Boyer joined allen p tanner's group
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
Patrick Michaelyan replied to Patrick Michaelyan's discussion Hot Upper Stories
Ed Minch replied to Patrick Michaelyan's discussion Hot Upper Stories© 2013 Created by Lawrence Berkeley National Laboratory.