Permalink Reply by Emily Rogers on May 17, 2012 at 1:42pm Hi Robert,
I checked with our technical department here and they believe Table 4A would be the one used for an insulated roof.
Hope this helps.
Permalink Reply by Isaac Savage on April 11, 2013 at 10:24am Yes. It does. Which software are you using to model your projects? If you're using RightSuite (aka Wrightsoft) I can give you some guidance.
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Jon Haehnel replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
Tom Smith replied to Patrick Michaelyan's discussion Hot Upper Stories
John Rising replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
Isaac Savage's event was featured
Craig Savage's video was featured
Nick Helmholdt replied to Joshua Knittel's discussion Google Thermal View? in the group INFRARED THERMOGRAPHY USERS
Paul Scheckel posted a blog post
Tom Delconte posted a blog post© 2013 Created by Lawrence Berkeley National Laboratory.