Welcome to the Forum (859)

Discussions Replies Latest Activity

New prerequisites for BPI certification

 I just received an email

Started by randy tolowski in BPI

0 Mar 12, 2012

32,000 active BPI certifications = how many real jobs?

32,000 is a lot of certifications. HOW MANY REAL JOBS WERE ADDED? Training for a new and exciting career in Energy Efficiency might not be…

Started by randy tolowski in General Forum

3 Mar 12, 2012
Reply by jerry gentile

BPI Announces Home Energy Upgrade Professional Certifications for Veterans

GI Bill Reimbursement Available for BPI Certification Testing  The Building Performance Institute, Inc. (BPI) is pleased to introduce pr…

Started by Cierra Mooney in BPI

1 Mar 9, 2012
Reply by Rick Wertheim

Empirical evidence that missing refrigerant suction line insulation decreases efficiency therefore increasing energy costs.

  Does anyone have any access to actual dollar figures for the cost of missing/ torn/ broken refrigerant suction line insulation?   For the…

Started by Michael Matthews in General Forum

4 Mar 9, 2012
Reply by Michael Matthews

Knob and Tube

TVA prepared a detailed retrofit manual in the 1970s for its residential retrofit program that led to 1.2 million homes being upgraded. The…

Started by Bob Sullivan in Best Practices

0 Mar 8, 2012

BPI Accepting Applications for Multifamily Standards Technical Committee

The Building Performance Institute, Inc. (BPI) seeks applications from individuals interested in serving on the Multifamily Standards Techn…

Started by Cierra Mooney in BPI

0 Mar 6, 2012

Mechanical Ventilation per ASHRAE 62.2

Hello All, We are working on a project with Habitat and our trying to provide recommendations for ventilation. We would like to see them in…

Started by Stefan Peter-Contesse in Best Practices

5 Mar 6, 2012
Reply by George W. Reynolds

Knob and tube

Wondering what best practices are for attics with ancient knob/tube wiring.  I'm doing the research, so I'm looking for sources (Codes, ASH…

Started by Tom Strumolo in Best Practices

9 Mar 2, 2012
Reply by Chris Stratton

An ACI Interview with BPI's Chief Executive Officer Larry Zarker

With over 30 years of experience in the residential buildings sector, Larry Zarker has managed the national expansion of BPI's standards, c…

Started by Cierra Mooney in BPI

0 Mar 1, 2012

Cree CR6 inserts

Hi, After installing a Cree CR6 insert, does the canister still needs to be boxed out to keep insulation from covering the fixture? Thanks…

Started by Paul Lasicki in General Forum

5 Mar 1, 2012
Reply by Bud Poll

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Mornin Brett. 90 to 85, yes a slight variance there.  Same ASTM test, different scientists,…"
19 hours ago
Bret Curry replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Great information Hal. It appears the thermal emissivity in your test was .85 rather than .90. Are…"
20 hours ago
Juan Roca commented on Dale Stephens's blog post LED Lighting - Garage Door opener interference
"Hi,There is a real problem with remote controls and LED lights. However, there is a solution in the…"
yesterday
Profile IconJuan Roca and Elizabeth Coe joined Home Energy Pros
yesterday
Casey Gesell posted videos
yesterday
Gerald Shechter posted videos
yesterday
Hal Skinner replied to Hal Skinner's discussion An example of what an RCC can do with no R- insulation in the walls.
"Bret,  here are the 2 reports I referred…"
yesterday
Craig Foley shared George Kopf's discussion on Twitter
yesterday

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service