Boxing and Insulating Around Non-ICAT Cans
I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
Windows: Different Summer and Winter U values?
Anyone ever hear of a window, or unit of insulated glass, as having different winter and summer U values?
This wasn't on an NFRC sticker. It was on a glass manufacturer's spec sheet.
They listed it like this:
Winter - Air / Argon 0.35 / 0.31
Summer - Air / Argon 0.32 / 0.28
Our program requires a U value of 0.30 to receive an incentive rebate. So obviously, homeowners and contractors want to average the summer and winter Argon fill U values to come up with an average of 0.295 and call it good.
I think it is just a piece of insulated glass that they want to have installed/retrofitted into their existing wood windows, and get an incentive for that.
Views: 768
- Attachments:
-
-
AGC Glass Performance Data.pdf, 246 KB
-
Replies to This Discussion
-
Permalink Reply by christian kohler on -
The winter U-value is what is shown on the NFRC labels, and should be used for code compliance and incentive programs. It is calculated at -18C (about 0F) outside, and 21 C (about 70F), and a roughly 15 mph wind speed. The summer U-value is calculated with conditions where it is warm outside and hardly any wind. This means that the U-value will be a bit better, but it is not a representative condition for heat losss. The Solar Heat Gain Coefficient (SHGC) is more important during periods with solar gain. So think U-value for heating, and SHGC for cooling.
Christian
WIndows and Daylighting Group
Lawrence Berkeley National Laboratory
-
Permalink Reply by Steve Waclo on -
Adam:
Currently in communication with this gentleman:
Andre Anders, PhD
Leader, Plasma Applications Group
Lawrence Berkeley National Laboratory
1 Cyclotron Road, MS 53, Berkeley, California 94720, USA
Tel. 510-486-6745, Fax 510-486-4374
He's circulating the information among his associates and will be in touch following the holiday. Will probably find it's way Christian at LBNL, who has responded since last I checked in.
BTW, Christian's advice to use the winter number is probably not what you wanted to hear regarding the available incentive. If 0.30 U is a common cut off # for incentives, I would expect manufacturers to work to that figure, although in a manufacturing environment, such changes may be a challenge. Perhaps a bit of latitude from incentive providers is in order...who is going to notice a U difference of 0.01 ?
Thanks for surfacing this mystery.
-
Permalink Reply by christian kohler on
-
Steve, Adam,
Andre forwarded your question to me, that is why I responded here. Many manufacturers have products that meet U=0.30, since that was the cut-off for the IRS tax credit.
If you are looking for even better windows, you can take a look at this website, where you can find listing of manufacturers that meet U=0.22 and less.
http://www.windowsvolumepurchase.org/
Christian
-
Permalink Reply by Adam Zielinski on
-
Thank you for the replies! Our program does require NFRC stickers, so this guy is going to be out of luck anyways.
But I was curious about the different winter and summer U values anyways. Thanks for the response and clairificaiton!
Adam
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Johnny Ritzo's discussion was featuredSelecting a Water Heater
I am looking at updating the heating and water heating systems in a rental home I recently…See More
George Kopf's discussion was featuredMisting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation
As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
Tom Delconte's blog post was featuredThe Surroundings Are Comprised of (fill in the blank) !
In Building Science…See More
Christopher Morin's blog post was featuredSelling with Rebates: The Simple Payback
The easiest way to show a homeowner how their investment in high-efficient equipment will help…See More
Mike Rogers's blog post was featuredHOMES Act introduced with Bi-Partisan Sponsorship
We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
Mike Rogers posted a blog postHOMES Act introduced with Bi-Partisan Sponsorship
We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
David Eggleton replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"That varies, as policies are different from state to state."
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase"I have a Fluke TIR 32. Used aproximately 10 times 1.5 yrs old. This is the first…"
Orvil D Boyer joined allen p tanner's group
Energy Auditing Equipment for Sale, Trade or to Purchase
Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
George Kopf posted a discussionMisting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation
As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
© 2013 Created by Lawrence Berkeley National Laboratory.
