The L-shaped probe grew legs, so this was improvised with a straight metal tube. There seems to be a persistent notion that angling the probe toward the appliance (into the exhaust stream) is the correct technique, but wouldn't this result in interference from ram air pressure of the rising flue gases?

Tags: CAS, CAZ, analysis, combustion, draft, pitot, safety, spillage, tube

Views: 401

Reply to This

Replies to This Discussion

Ted, I see your point now. Thanks for clarifying. The CAZ pressure was recorded independly of the draft. I haven't seen anyone measure both results simultaneously on one manometer, but that is a really good way to illustrate the interaction between the two forces.
... and one of the things that makes dg700 such a cool tool.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Chad Mcaulife posted photos
3 hours ago
Bob Blanchette commented on Jeremy Begley's blog post The Home Envelope : Does it Really Matter in a Heat Loss Calculation
"Infiltration makes a HUGE difference. Look at the heat loads on a windy day vs. a calm one. On a…"
3 hours ago
Bob Blanchette commented on Everblue's blog post Poor HVAC Installation Leads to Increased Energy Use
"That explains a LOT of why HVAC system continue to be sized by the same "rule of thumb"…"
4 hours ago
Profile IconChristian Asdal and Shashank Kirloskar joined Home Energy Pros
4 hours ago
Don Fitchett shared their video on Digg
5 hours ago
Don Fitchett shared their video on StumbleUpon
5 hours ago
Don Fitchett shared their video on Twitter
5 hours ago
Mark posted events
6 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service