I'm shopping around for LED lights and want to know about your experience if you bought LED lights before.

  1. Where did you buy them and why?
  2. Did price have much to do about your decision?
  3. Do you have any tips after going through the whole process?
  4. If you're Canadian, I'd like to know too!

Thanks for your help energy pros!

Tags: buying, guide, help, led, tips

Views: 449

Reply to This

Replies to This Discussion

In the US, www.dsireusa.org is a good resource on energy efficiency incentives.

I went to bulbs.com and bought lighting science 8 watt MR16s for my kitchen track lights. A lighting salesman told me to buy lighting science after I told him I wanted the highest CRI available in a MR16 LED. He told me that a museum in San Francisco replaced their 50 watt halogens with these lamps and no one noticed! That is huge!

My lovely wife and  I are thrilled with the light the 25 degree 3000K light provide our kitchen. It looks fantastic, I am really happy and am in the process of changing out all our track lights with these Lighting Science MR16 LEDs. 

http://www.ase.org/resources/buying-best-bulb-energy-efficient-ligh...

This is one of the better  video clips

Eric Kjelshus Energy HVAC

I would like to talk about price. When we switch to LED bulbs, we didn't expect to save much cash. Its better if we think it as an investment, so don't let price affect your decision.

LEDinovation - All america made, most efficient, warranty, dimmable, good color rendition and all around nice looking 

I took the plunge in stages between November and May and have installed approximately 70 Cree LED lamps, mostly 60 Watt equivalents, but a fair proportion of 40s and a few 75s. The initial batch came from HD, but subsequent batches came from various E-Bay sellers markedly les expensive than HD...prices have dropped to about $7 per bulb for 40s and 60s.

All are 2700K

Electricity usage has fallen 2-3 kwh / day, not much, but the Crees replaced a passel of CFLs, so I only picked up about 5 Watts per lamp. The best feature of the Crees over CFLs is instant full brightness.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

tedkidd commented on Diane Chojnowski's group Hall of Shame
"Give this thread a bump - here's my "bad" album and some of the…"
17 minutes ago
Eric Kjelshus commented on Adam Swain's blog post Top Worst Crawl Space Insulation Ideas
"6) Radiant barrier- under the gravel is just a barrier but with holes each square inch its not a…"
21 minutes ago
tedkidd replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"It is very common to find equipment grossly oversized. I mean 1.5 - 2x Manual J and 2-3x the size…"
24 minutes ago
tedkidd replied to Luis Hernandez's discussion Basic Heat loss information in the group TREAT Software
"Luis,  Click "selected reports, energy savings and use, design heating and cooling…"
34 minutes ago
Ed Minch replied to Kurt Shafer's discussion Where can I find the best radiant barrier to install under my roof?
"The important thing here is the surface temperature of the ceiling against the attic as compared to…"
43 minutes ago
Profile IconSharon DeRidder, Jason Hiep, Chris Chmiel and 4 more joined Home Energy Pros
1 hour ago
John Watson Ley replied to Luis Hernandez's discussion Distribution Efficiency and heating safety factor in TREAT in the group TREAT Software
"Luis, Good Evening, John of NY Construction Pros here. I don't think you need to worry about…"
13 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
Thumbnail

BPI Introduces IDL Certification for Duct and Envelope Tightness Testing Verification

Expand your knowledge, expertise and opportunity with BPI's BRAND NEW Infiltration and Duct Leakage…See More
17 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service