What were R-value requirements of various code versions?

I'm trying to figure out what level of attic, wall, basement wall insulation levels were required by the different code versions over the years. If you know of a table of this type of info I would find it useful to have. Or if you have the knowledge to help me build this table your help would be appreciated. The table would look something like:

                                                    R-Value required in:

                      |  ---------------------------------------------------------------------------------------------

Year of Code   |  Attic     Walls     Basement Walls     Crawlspace ceiling      Etc.

----------------------|------------------------------------------------------------------------------------------------

2015               |

2012

2009                                Filled in R-values for various locations

2006

2003

2000

1997

1994

...

1970's

...

1960's

etc.

Thanks in advance for any help!

-Martin

Tags: code, insulation, r-value

Views: 247

Reply to This

Replies to This Discussion

Hi Martin, that's a tough question.  It is tough enough to determine which of the more recent codes any jurisdiction is following.  Here in Maine they only recently adopted a state wide code program and even that has its exemptions.  I could probably go down to my local code office and with some effort come up with a paper trail for what we have been following over the years.  But that would have little relevance to other towns or states.

Can you share your objective?

Bud

Yes, finding out when codes were adopted in every municipality would be very hard. But filling out this table shouldn't be that bad. The reason I want to do this is to be able to have an idea of what insulation is in a home just by finding out the year it was built. I could figure out when the codes were adopted in the areas around Denver with a little effort too. This will help with marketing efforts because the energy company here is offering rebates on insulation if the home has R-19 or less, but no rebate if it had more. So when targeting homes that had R-19 originally I can talk to them about rebates, but not the newer homes. Make sense?

http://thehtrc.com/2014/first-look-upcoming-codes-changes has the national 2006 to 2015 tables (no changes between the 12 & 15) FYI - I don't think there was a change between 03 & 06 but I am not positive on that

There are a few free online code resources to research past values

Thanks! I've got 2006-15 filled in now. Can you tell me where on the web those free code resources are? I found some for the newer codes but I haven't found them for 2003 and earlier. Thanks.

Looks like the ICC cracked down on a few sites - one I still see (but have never used) https://archive.org/details/publicsafetycode

Martin, What the code required at a certain time and what the builder did are two separate issues.  Not until recently did you start to see real enforcement of the energy code.  There was no code prior to 1975 and what was used from '75 to 1986 was MEC, a very light duty idea of energy efficiency. 

Martin,

Local building code R-Value building requirement knowledge is a challenge

Here is what I know.
HUD code homes since 1998 was by split into 3 Zones for the USA see attachment

Insulation Manufactures would be your best resource. The R-Value they could produce for batts for those time periods
Zone I = R-11, R-19/R-20
Zone II = R-11/R-22/R-25
Zone III =R-19/R22/R-25

Current CA local building codes are listed on the attachments. Climate zone determines specific requirements for R-value for residential homes. The mandate is proven Net Zero for 2020 for residential homes before the sale.

This is the best I can offer you

Attachments:

Thanks for your reply Steven.

RSS

Featured Forum Discussions

BPI Anaylist and installers

Started by Larry R Waters in BPI. Last reply by Quinn Korzeniecki yesterday. 1 Reply

What causes a temperature plane in a home

Started by Energy Wise Solutions in HVAC. Last reply by Brad Cook on Thursday. 6 Replies

Velocity Pressure Testing

Started by Horace Douglas Hunt, Jr. in General Forum. Last reply by Horace Douglas Hunt, Jr. Apr 15. 2 Replies

Videos

  • Add Videos
  • View All

Latest Activity

Chris Woods added a discussion to the group Energy Auditing Equipment for Sale, Trade or to Purchase
Thumbnail

Minneapolis Blower Door Fan and Door frame $990 OBO

I have a used Minneapolis blower door fan (fan only, no controls or panel) and the blower door…See More
yesterday
Profile IconManuela L Heyn and Paul Nagel joined Home Energy Pros
yesterday
Bill Spohn replied to Eric Sperline's discussion Wanted: Energy Auditing Equipment for sale in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"If you choose to buy new, give TruTech at call at 1-888-224-3437 option 1"
yesterday
Home Energy Magazine's blog post was featured

The Legends of Home Performance

A project long in the making, we're happy to finally reveal some of our Legends of Home Performance…See More
yesterday
Quinn Korzeniecki replied to Larry R Waters's discussion BPI Anaylist
"Hi Larry, We're glad you're reaching out to hire some BPI folks! You can also submit…"
yesterday
Larry R Waters posted a discussion

BPI Anaylist

Industry leader in the north bay area California. Looking for experienced professionals and future…See More
yesterday
Larry R Waters joined Diane Chojnowski's group
Thumbnail

Job Board

This group is for posting jobs related to all aspects of the home performance industry including…See More
yesterday
John Nicholas replied to Jim Fowler's discussion TREAT modeling of mid-rise apartments low heating load
"So why is tenant behavior significantly different in this building?"
yesterday

Home Energy Pros

Welcome to Home Energy Pros – the unique digital community by and for those who work in the home energy performance arena.

Home Energy Pros was founded by the developers of Home Energy Saver Pro (supported by the U.S. Department of Energy) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network. Please honor our Guidelines

© 2017   Created by Lawrence Berkeley National Laboratory.   Powered by

Badges  |  Report an Issue  |  Terms of Service