What software program do you use for an Audit report?

I would like some feedback on software programs used for audit reports, what do you use ?

Views: 1028

Reply to This

Replies to This Discussion

Let's not go overboard on windows, please.  Check all the stats and you will see that even a Low-E replacement may only save $10 a year, and this for a $4-600 investment.  We recently followed an auditor into a house after he diagnosed a cold bedroom as needing caulk around the window trim when it was a missing band joist in the floor where it cantilevered out into the front porch pent roof - really easy to spot from the street as you drive by and even easier to diagnose properly.  And this auditor was both BPI and RESNET certified.  Let's all agree that windows and receptacle gaskets mean nothing (with rare exceptions) and move on to the real problems.  

 

Ed Minch

I fully agree; windows are very rarely the right place to make efficiency improvements. There are usually many other weak spots in a home that don't cost nearly as much to improve.
The better question would be which of the products are US Dept. of Energy approved as the country is moving towards National Weatherization and Energy Retrofit Standards!

Rick...you hit the nail on the head. BPI announced last fall that they were developing something for the EPA I believe...who is merging programs with DOE

http://bpi.org/news_expansion.aspx?selectedID=160

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.  Home Energy Pros is sponsored by the Better Buildings Residential Network.

Latest Activity

Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Hans, The car manufacturer's are doing it with mass flow sensors and oxygen sensors…"
10 hours ago
Dale Pickard replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I was trying to avoid naming manufacturers, but I was going by the published information for the…"
11 hours ago
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"I look at this not about AFUE,  but flue gas dewpoint.  If your burn rate is rotting the…"
13 hours ago
Bob Blanchette replied to Kirsten Richnavsky's discussion Crawl spaces and attics: OSHA to implement new rule on confined spaces
"Keeping HVAC equipment out of attics should be part of the new code. "
14 hours ago
Linda Wigington replied to Linda Wigington's discussion Weigh in - Honorable Mention? 2nd Base? Half-Way There? 50% Better? On the Path? in the group 1000 Home Challenge
"Nickie -  Good points. I think it is easy enough to flag or designate projects that achieve…"
15 hours ago
Morgan M Audetat replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"Though Viessmann is relatively unique in the application of Lambda technology to condensing…"
16 hours ago
Lars olsen posted a blog post
yesterday
Eric Kjelshus replied to Rod Fox's discussion Does altitude affect AFUE? or just the input/output BTUs?
"The heat exchanger gets burnt out, if presser is to high or if mix is to rich, then I see holes in…"
yesterday

© 2015   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service