"Could you have them make a simple two line graph of the outside temperature, noting sun/clouds,…"
What is the R Value of a 2x6 dense packed cellulose wall?
I am reviewing the requirements of the new Maine Uniform Building and Energy Code that goes into effect 12/1/2010. The required R value for a wood framed wall is R20. If I assume the Dense Packed Cellulose has an R value of 3.4 per inch and a 2x6 is really only 5.5" deep, then 5.5" of cellulose is only R18.7 which doesn't quite meet the standard.
I could put in R21 fiberglass and meet the standard, but I am sure the cellulose would out perform the glass in the real world.
How does everyone else view this subject?
I could put in R21 fiberglass and meet the standard, but I am sure the cellulose would out perform the glass in the real world.
How does everyone else view this subject?
Views: 1014
Replies to This Discussion
-
Permalink Reply by Scott cragun on -
According to National Fiber's website a 2 x 6 wall at 5.5 " thick has an R value of R20 when dense packed at 3.5 lbs per cubic foot. The reason the Code has a minimum wall insulation requirement of R20 is because thats as good as it gets with celluloce, if the cellulose manufacturers hadn't been allowed their input the minimum would be R21 (fiberglass batts).
-
Permalink Reply by Al Maloney on
-
Thanks for the reply Scott. I found that on the National Fiber site after I posted the message.
What approach do you plan to take to get R49 in a cathedral ceiling where the slope area is greater than 500 ft2 or 20% of the total ceiling area?
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"You make some valid points, especially with the base rate charges. Increasing the base rate instead…"
Bob Blanchette replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"Amen, make energy show it's true cost instead of subsidizing it.
We have some of the lowest…"
Dennis Heidner replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??"The press report really doesn't give enough information to clearly answer why they are…"
Edward Foskey commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Gustavo,
Thanks for the input. I agree with you in that I will be waiting till my system's…"
Gustavo Melo commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Any system that is out of warranty is really a coin toss as to whether it is financially better to…"
Dennis Heidner replied to J.C. Martel's discussion Disasters & sustainable energy"Such as Greensburg…"
Tom Delconte commented on Edward Foskey's blog post Preparing to Update the Heat Pump"Thanks, Ed, I get it now. I would just put in what my hvac guy tells me to put in: a $17,000…"
Jim Gunshinan commented on Jim Gunshinan's blog post The Universe Is Made of Stories"Hi Tom,
I'm sorry you didn't think my blog post was helpful or appropriate. I'll…"
Tom Delconte commented on Jim Gunshinan's blog post The Universe Is Made of Stories"Whatever happened to separation of church, state, and scientific home building science? What would…"
Craig Savage's video was featuredWhat is Building America
The U.S. Department of Energy's (DOE) Building America program is a source of innovation in residential building energy performance, durability, quality, aff...
Jim Gunshinan's blog post was featuredThe Universe Is Made of Stories
The late poet and political activist Muriel Rukeyser famously said, The Universe is made of…See More
© 2013 Created by Lawrence Berkeley National Laboratory.
