Raising Homes with House Raising Contractors
Home Raising, being essential for low lying areas, it is a fun detail. Providing geographical…See More
What is the R Value of a 2x6 dense packed cellulose wall?
I am reviewing the requirements of the new Maine Uniform Building and Energy Code that goes into effect 12/1/2010. The required R value for a wood framed wall is R20. If I assume the Dense Packed Cellulose has an R value of 3.4 per inch and a 2x6 is really only 5.5" deep, then 5.5" of cellulose is only R18.7 which doesn't quite meet the standard.
I could put in R21 fiberglass and meet the standard, but I am sure the cellulose would out perform the glass in the real world.
How does everyone else view this subject?
I could put in R21 fiberglass and meet the standard, but I am sure the cellulose would out perform the glass in the real world.
How does everyone else view this subject?
Views: 1110
Replies to This Discussion
-
Permalink Reply by Scott cragun on -
According to National Fiber's website a 2 x 6 wall at 5.5 " thick has an R value of R20 when dense packed at 3.5 lbs per cubic foot. The reason the Code has a minimum wall insulation requirement of R20 is because thats as good as it gets with celluloce, if the cellulose manufacturers hadn't been allowed their input the minimum would be R21 (fiberglass batts).
-
Permalink Reply by Al Maloney on
-
Thanks for the reply Scott. I found that on the National Fiber site after I posted the message.
What approach do you plan to take to get R49 in a cathedral ceiling where the slope area is greater than 500 ft2 or 20% of the total ceiling area?
Home Energy Pros
Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.
Latest Activity
Dennis Heidner commented on Macie Melendez's blog post Passive Proponent—Q&A with Brandon Weiss"Don't forget Build America program from…"
John Wes joined James Sayers's group
Marketing Energy Efficiency
Sharing ideas, tools and examples of promoting energy efficiency to consumersSee More
John Wes joined Tom White's group
Weatherization
Share your concerns and successes as a weatherization professional, or information for this…See More
John Wes joined James Sayers's group
Social Media and Energy Efficiency
Tell us how you reach customers, contractors and others using online social media.See More
John Wes joined allen p tanner's group
Energy Auditing Equipment for Sale, Trade or to Purchase
Discuss the pros and cons of the equipment you are interested in prior to purchase. Post equipment…See More
Greg Whitchurch commented on Macie Melendez's blog post Passive Proponent—Q&A with Brandon Weiss"Timothy,
For a start, you could…"
Greg Traster posted a blog postThe Benefits Of Using Energy Star Shingles
In the harsh economic climate, saving money is of interest to everyone. Here is one method that you…See More
Mark Richardson commented on Mark Richardson's group Renewable Energy"Thanks Everblue,
I am proud to say that I have also recently achieved the NABCEP Certified PV…"
peter chang replied to peter chang's discussion Electrical system data loggers"Thanks, this is proving very fruitful. I have a lot to learn but this will get me started in the…"
Sandra K. Adomatis, SRA posted a blog postThree WWWs to completing the Appraisal Institute’s Residential Green and Energy Efficient Addendum
The Residential Green and Energy Efficient Addendum is a form used to standardize the reporting of…See More
© 2013 Created by Lawrence Berkeley National Laboratory.
