Someone asked me how long LED last. I read in a LinkedIn group discussion ("Hot Buttons In Lighting") that EPA is considering lowering the ENERGY STAR requirement for LED from 15,000–20,000 to 10,000 hours to lower cost, make LED and CFL equivalent, and make LED more affordable.

There are good reasons to lower the lifetime or raise it. But what do we tell people who ask? And what do you think EPA should do?

Tags: LED, lighting

Views: 436

Reply to This

Replies to This Discussion

Joesph-

while I agree with your post for the most part, an LED luminiare

is warm ( assuming the use of DC/LEDs ) they definitely do generate

heat but having said that I would concur there are secondary economic benefits

if using LED in downlighting cans- Many of these cans were designed for

 incandescent lighting and are ventilated for their role using incandescent lamps.

 

The excessive ventilation equates to unnecessary air infiltration when these old

cans are being used with a LED luminiares- many are or will be switched to LED use.There are

considerations about air infiltration/exfiltration issue- its a sizeable amount of waste.

 

As a picture is worth a thousand words I should probably of posted 2 thermal

images of a LED downlight (purpose built) vs the energy waste seen in

a thermal image of a standard incandescent down light. Its very revealing !

 

 

Really good points Joseph about the cooling energy savings and the benefit of a sealed can-light. I wonder what the equivalent leakage area of all the can lights in North America would be...


We published an article a while back in Home Energy by Bob Clear about his calculations of the heating load added by CFLs when replacing incandescent lights, compared to the electric energy savings. In very cold climates, you add more in heating load than you save in electricity by replacing incandescents with CFLs. But in the vast majority of climates, the electrical savings outweigh any added heat load. So LEDs must be a good choice even in predominantly heating climates as well as cooling ones.

Here's a new bulb for industrial applications...

http://ledsmagazine.com/press/36016

No IR or UV so your art won't fade

Joseph-

The glacial light product is only a so- so example of 2012 era SSL luminiares -

There are many competitors with better performance - two examples the

Glacial light is not a UL approved product & they only warranty their fine

product for 8 seasons - That's a weak warranty for a purportedly well

engineered lamp- but your highlighting LEDs magazine as a bona fide

source of SSL industry developements is helpful - it's chocked full of info.

 

One last observation - as you stated the lack of IR & UV radiation is not

present with LED luminiares true  - but why would anyone be displaying

art under industrial hi bay lighting- unless the artwork in question was

as big as an elephant - btw a bulb refers to a "lamp" with a bulbous shape

like an A19 or a B10 lamps . You plant "bulbs" you illuminate with lamps.

 

 

 

Ha Ha Ha! I like planting bulbs because, especially like iris, they double in a season and where you had 8 last year, now 16 are fighting for light and water! If this same thing were true with lamps, we could all plant and plan our retirements in 25 years! " "What have you got there Jonesy? " ..."Oh just a crop of cheapo Glacials next to my Crees... and my Philips will be coming up in a couple of weeks. I can't wait for that CRI of 79! WooHoo...thirty lamps to the square foot at $28 a pop, so to speak!" And I thank you, Dennis, for the lesson on the lingo. As I obviously grew up with the Edisons and we called soda "pop" and lamps "bulbs", it may take this geezer a while to adapt to the terms so I appreciate all the help I can get, and this little forum, like LEDs magazine, is helpful because of experts willing to share.

 

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy, under the American Recovery and Reinvestment Act) and brought to you in partnership with Home Energy magazine.

Latest Activity

Eric Kjelshus replied to Johnny Ritzo's discussion Selecting a Water Heater
"I have been using  Rheem or State or Brad/white PVC flued tank type hot water heater…"
7 hours ago
Bachi Brunato replied to Bachi Brunato's discussion Boxing and Insulating Around Non-ICAT Cans
"As it turns out, we have 10 Halo 99RT housings with Halo 998P Eyeball trim in the kitchen. The trim…"
9 hours ago
Bachi Brunato's discussion was featured

Boxing and Insulating Around Non-ICAT Cans

I have a client with 16) 4" halogen recessed light fixtures in the attic.I'd like to cover the cans…See More
11 hours ago
Johnny Ritzo's discussion was featured

Selecting a Water Heater

I am looking at updating the heating and water heating systems in a rental home I recently…See More
11 hours ago
George Kopf's discussion was featured

Misting Aeroseal in Pressurized Home = Amazing Air Sealing Innovation

As a training program manager for a non-profit, I am often too busy managing my program to catch…See More
11 hours ago
Tom Delconte's blog post was featured
11 hours ago
Christopher Morin's blog post was featured

Selling with Rebates: The Simple Payback

  The easiest way to show a homeowner how their investment in high-efficient equipment will help…See More
11 hours ago
Edward Foskey's blog post was featured
11 hours ago
Mike Rogers's blog post was featured

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
11 hours ago
Mike Rogers posted a blog post

HOMES Act introduced with Bi-Partisan Sponsorship

We don't see a lot of bi-partisan bills in Congress these days. Here's one focusing on home…See More
15 hours ago
David Eggleton replied to Jose Macho's discussion Why Are Energy-Saving Home Inprovements Down??
"That varies, as policies are different from state to state."
15 hours ago
Orvil D Boyer replied to David Starrett's discussion I am looking for a good IR camera in the group Energy Auditing Equipment for Sale, Trade or to Purchase
"I have a Fluke TIR 32.  Used aproximately 10 times 1.5 yrs old.  This is the first…"
15 hours ago

© 2013   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service