Had our furnace and air ducts cleaned today for the first time in years; could have spun an entire dog from all the embedded hair.  The serviceman tried to upsell me with both a new reusable filter (to get 94% of the airborne substances), and a UV light to be installed in the furnace to get the other 6% worth of mold spores, bacteria and no-seeums.  I bought the filter and also a thorough cleaning of the furnace, but am waiting to decide on the UV light--another $400--until I can determine if this will really improve our indoor air quality.  The house is 1000 sq ft, one dog and two dogwalkers live there.  Any opinions?  One dogwalker (me) has asthma.  I couldn't find any research from a casual googling.

Views: 31696

Reply to This

Replies to This Discussion

UV lights have their place - but in my opinion are ridiculously oversold.  In order to do ANYTHING worthwhile they MUST shine directly on the evaporator coil / drain pan.  Any other location and they do nothing useful.  Only when the shine on the evaporator coil do they have a long enough exposure time to reduce mold and such.

If the UV light is expected to kill mold spores as they fly past in the return duct - it will NEVER happen.  the total dose in the fraction of a second the mold passes thru the light is way to small to damage the mold in any way.  And as far as "killing" mold spores - those are the toughest, most well protected life stage of mold.  It can survive for decades in harsh environments and still be viable.  Why would spores be 'killed' by a fraction of a second of UV?  If that were to happen, then non-metal ducts would not survive the UV light.

I bought the UV lights and found myself replacing the expensive bulbs way more often than one would expect.  I do not recommend the UV component unless there were a realistic possibility that it "might" (emphasize "MIGHT") be of some benefit to an extremely infirm occupant whose doctor recommends such equipment.  Our houses are not hospital isolation wards . . . not even if there is an asthmatic occupant. 

Still, ducts do need to be cleaned periodically.  It's not clear to me why anybody is surprised to learn this to be the case.  The insides of the ducts are inside your house every bit as much as the living room rug.  Vacuuming the rug the does not involve shining an ultraviolet light on the floor.

I did use the 4" pleated filter but went back to a more conventional "rock catcher." The high-MERV filters collect smaller and smaller particles and thus may disturb the air flow and compromise the life of the furnace by making the fan work more than it may have been engineered for and by allowing the heat exchanger to expand excessively because of overheating. 

Don't do UV.

Grab a MERV 13 from filtersfast or something.

RSS

Home Energy Pros

Home Energy Pros was founded by the developers of Home Energy Saver Pro (sponsored by the U.S. Department of Energy,) and brought to you in partnership with Home Energy magazine.

Latest Activity

Hal Skinner replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"Hey Tom, I will find the ORNL repoprt and post it.  It was a test on a ballasted roof sample.…"
5 hours ago
Tom Mallard replied to Hal Skinner's discussion How our ceramic based RCC works in the group Radiant Control Coatings
"So it seems that what you're saying is for heat-transfer the stuff has little resistance or…"
6 hours ago
Hal Skinner added a discussion to the group Radiant Control Coatings
Thumbnail

How our ceramic based RCC works

How our RCC worksEveryone knows, understands and accepts that RCCs reflect heat away from roofs,…See More
7 hours ago
Mike Kandel posted a discussion

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Mike Kandel added a discussion to the group Building Performance Institute (BPI)
Thumbnail

Earn BPI CEUs at 3rd Annual Building Performance Forum

If you're searching for BPI CEUs, you'll find plenty at the 3rd Annual Building Performance Forum…See More
12 hours ago
Sean Lintow Sr commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"4% TOTAL Ted - Leakage to outside was stripped from the codes & for good reason"
15 hours ago
tedkidd commented on Christopher Morin's blog post UPDATED: Big Changes for Duct Testing in MA
"Wait!  4% total leakage or 4% leakage to outdoors? "
16 hours ago
Tom White's video was featured

Alliant Energy's PowerHouse TV: Sealing Leaky Ductwork

The PowerHouse television shows are written and produced by Alliant Energy, an energy services company based in Madison, Wis. The first PowerHouse episode was aired in September 1996 on KCRG-TV9 in Cedar Rapids, Iowa, and appears in six broadcast…
18 hours ago

© 2014   Created by Lawrence Berkeley National Laboratory.

Badges  |  Report an Issue  |  Terms of Service